® USER’S GUIDE 5200 & 7340 SERIES 3 Safety Instructions 4 Product View 5 Assembly 5 Special Features 6-7 Operation 8 Maintenance and Care 9 Troubleshooting 10 Consumer Services 11 Replacement Parts 12 Warranty
Thanks for buying a BISSELL Flip-It We’re glad you purchased a BISSELL Flip-It or Flip-It Select. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Flip-It is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your Flip-It® ■ Do not use without filter in place. ■ Close attention is necessary when used by or near children WARNING: To reduce the risk SAVE THESE of fire, electric shock, or injury: ■ Use indoors only. INSTRUCTIONS. ■ Do not leave FLIP-IT when it is plugged in. ® ■ Do not service FLIP-IT® when it is plugged in.
Spray Trigger Product view Cord Clip Carry Handle On/Off Switch Built-in Heater (On Select Models) Quick Release Cord Wrap Power Cord Clean Tank Heater Indicator Light (On Select Models) Pleated Filter Dirty Tank Removable Gentle Clean™ Brush & Pad Removable Wet Clean™ Nozzle Wet Vacuum Suction Path NOTE: Model 7340 shown with Heater Dry Vacuum Suction Path Cleaning fluid Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule.
Assembly Assembling your new BISSELL Flip-It is a simple 2 Step Process: 1. 2. NOTE: Remove clean tank from unit first. 1. Insert the handle into the top of the unit, making sure the spray trigger is on the Wet Vacuum side. Make sure the screw opening in the handle is aligned with the hole in the housing of the unit. 2. Insert screw; gently screw in until tight with the body of the unit.
Operation 1. Remove the Clean Tank from the machine. 2. Unscrew the black cap on the bottom of the solution tank and remove the insert. 3. Filling the Clean Tank: Fill with BISSELL 2X formula to the formula fill line and fill with water to the Water Line. Replace the Cap & Insert Assembly. Place the full tank back into the unit. 1. 3. Inserting the Gentle Clean™ brush or pad 1. The first time you use your unit, the Gentle Clean™ Pad will be in the unit.
Operation Wet cleaning /vacuuming 1. To begin Wet Cleaning, simply pull the Spray Trigger. Water and Formula will be dispensed through the Gentle Clean™ Brush or Pad. 2. On Flip-it Select Models, for heated cleaning press the switch down to turn on the Built-In Heater. 3. To maximize the area to be cleaned, it is recommended that the Spray Trigger is squeezed on the forward stroke and released on the reverse stroke. 4.
Maintenance and care Emptying the dirty tank 1. Remove the Dirty Tank Lid. Then dump the dirty water and debris into the sink, toilet, laundry tub or outside. Rinse the tank out with warm water and replace it in the unit. Cleaning the filter 1. While the Dirty Tank is out of the unit, remove the Pleated Filter from the top of the tank. Remove dirt and debris from the pleats by gently tapping the filter over the wastebasket or outside. 2. The Pleated Filter can also be rinsed under water to clean. 1.
W arning: To reduce the risk of Troubleshooting fire, electric shock or injury unplug from outlet before servicing. Water & formula are draining out from the clean tank. Possible Causes Remedies 1. Clean tank black cap & valve are not on tight 1. 2. Clean tank black cap & valve are cross threaded 2. Remove black cap & value and attach tightly Remove black cap & valve and make sure it is screwed on straight and tightly No suction Possible Causes Remedies 1.
BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. EST 9 a.m. — 8 p.m. EST Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com or www.2xbissell.com When contacting BISSELL, have model number of unit available.
Replacement parts - BISSELL Flip-It 5200 & Flip-It Select 7340 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part No.
Warranty - BISSELL Flip-It This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.