AromaPro ™ USER’S GUIDE 8910 SERIES 220-240V 3 Safety Instructions 4-5 Product View 6 Assembly 6-8 Special Features 8-15 Operation 16 Maintenance and Care 16-18 Troubleshooting 18 Consumer Services 19 Replacement Parts 20 Warranty ug310-5822_8910E_107.
Thanks for buying a BISSELL AromaPro™ We’re glad you purchased a BISSELL AromaPro heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your AromaPro is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT DEEP CLEANER. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product view TurboBrush™ Storage (Select Models) SmartTemp™ Ready Light Flow Indicator (Filter Inside) Lower Handle SmartMix™ Switch SmartMix™ Tank ReadyTools™ Dial Belt Access Door DirtLifter™ PowerBrush Optional Accessories: Floor Nozzle Window These items are available for purchase with your model. To order replacement parts or additional tools or formulas, please refer to page 19.
Keep plenty of genuine BISSELL deep cleaning formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may harm the machine and will void the warranty. Product view Trigger Upper Handle Tool Caddy Power Cord Quick Release Power/SmartTemp™ Switch Tough Stain Brush Storage Tank-inTank™ Hex Nuts Handle Release 4" Upholstery Tool Storage (Select Models) Flex Hose BISSELL Formulas: 1.
How to use this guide This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL AromaPro. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this user's guide thoroughly before assembling your deep cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Special features SmartTemp™ SmartTemp Ready Light The BISSELL ProHeat models all feature a patented built-in heater which will heat hand hot tap water you put in up to 25° degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 180°. The power switch, which is located on the back of the machine, controls the power to the machine and the heater. DirtLifter™ PowerBrush The DirtLifter PowerBrush is designed to enhance cleaning performance.
Special features Tank-in-Tank™ Our Tank-in-Tank system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept separate. This allows you to maximize tank space, yet only carry one tank to and from the sink for emptying and filling.
Operation Fill the water tank 1 2 3 4 4. Fill up the bladder with clean hand hot tap water. *Do not boil or microwave water as it can destroy the bladder. 5. Replace the top of the tank by matching the lid 5 and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. 6 1. Release the handle and lay the machine handle back to access the tank. 2.
Operation Set ready tools dial ReadyTools Dial OR NG FLO ANI CLE LS AT TOO TRE PRE Set ReadyTools dial to floor cleaning. Power switch 1. 2. Plug into a proper outlet and turn the power switch to the ON ( I ) position. The switch is found on the back of the handle. Allow 1 minute for the built-in heater to warm-up before cleaning. The AromaPro will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning.
Operation Empty the tank 1. Remove the water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. 2. Empty collection water from bottom of tank.
Operation Cleaning with attachments 2. Follow the instructions on page 9 for filling the water tank and the formula tank. 3. Set ready tools dial to the tools setting. This will allow spray and divert the suction to the hose. bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg Your AromaPro machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1.
Operation Cleaning with attachments 7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. 8. When cleaning is complete, remove and rinse tools in clean, running water. 9. Coil hose around the tool caddy. 10.
Operation Stain removal Do Not Delay! Attending to an accident soon after it occurs ensures the chances for full removal. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula.
Operation Hard floor cleaning (Continued) 4. Fill the water tank with hand hot tap water and set aside. 5. Attach the hard floor tool onto the floor nozzle with the long tab to the right side of the floor nozzle. First attach left side (short tab) catching tab over nozzle edge. Gently bend long tab (right side) outward to easily snap over edge of clear nozzle on left. 6. Set the ReadyTools dial to Floor Cleaning. 7. Set the SmartMix dial to Normal. 8.
Maintenance and care Machine storage Once your cleaning is complete, make sure the water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next use. The SmartMix tank can remain filled and ready to go (store with machine set to water rinse setting), or it can simply be emptied back into the formula bottle if that is more convenient. Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing.
Troubleshooting Reduced spray or no spray (continued). Possible Cause Remedies 3. The filter may be clogged. 3. Clean out flow indicator filter, page 16. 4. Turn power OFF (O); remove & reseat tanks. 5. Turn power OFF (O); after 1 minute turn ON and press trigger. 6. Turn on the machine and check to see that the DirtLifter PowerBrush turns. If it does not, refer to #1 below. 4. Tanks may not be seated properly. 5. Pump may have lost prime. 6. The pump belt may be broken.
Troubleshooting Cleaner not picking up solution (continued). Remedies 6. Tank-in-tank has picked up 6. Empty tank-in-tank, refer to maximum dirty water. page 11. Other maintenance or service not included above should be performed by an authorized service representative. Possible Causes Thank you for selecting a BISSELL product.
Replacement parts - BISSELL AromaPro Below a list of common replacement parts*. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No.
Warranty - BISSELL AromaPro This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor. Limited Two Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc.
