8910 SERIES PROHEAT PET USER GUIDE ®
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. » Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing. » Use indoors only.
Thanks for buying a BISSELL deep cleaner We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL deep cleaner is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Product View 10 11 12 2 1 13 14 15 16 3 17 4 19 6 5 20 7 8 9 1 Tough Stain Tool 2 DeepReach Pet Tool 3 Heat Indicator Light / Built-In Heater 4 Formula Tank 5 SmartMix® Switch Controls the cleaning setting – choose between heavy traffic, normal, and water rinse 18 6 ReadyTools™ Dial 7 Belt Access Door 8 6 Rows DirtLifter® PowerBrush 9 Floor Nozzle 10 Spray Trigger 11 Cord Clip 12 Upper Handle 13 Quick Release™ Cord Wrap 21 14 15 16 17 18 19 20 21 Ready-to-Use Hose Power Switch Heater Swit
Cleaning fluid WARNING Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty. To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
Assembly WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. The only thing you will need to assemble your deep cleaner is a Phillips head screwdriver. 1. Slide upper handle onto lower handle. 2. Feed bundled power cord through tool caddy from caddy’s flat side. 3. Align tool caddy holes with upper handle holes. 1. 2. 3. 4. 4. Place hex nut into back of tool caddy and hold in place.
Operations Special Features SmartTemp® The BISSELL ProHeat models all feature a patented built-in heater which will heat hand hot tap water. The heater will never allow the temperature to exceed 180°F. The heater switch which is located on the back of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate or oriental rugs. SmartTemp Ready Light DirtLifter® PowerBrush The DirtLifter PowerBrush is designed to enhance cleaning performance.
Operations ReadyTools Dial This provides either floor cleaning or above the floor cleaning with the flip of a switch. Attach tool to the hose, and you are ready to go! Flow Indicator Flow Indicator This is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the carpet and will stop spinning when the formula tank or bladder needs to be refilled, or when the trigger is released.
Operations Fill the water tank 1. Recline the upper handle by pressing on pedal and lay it down to access the tank. 1. 2. 3. 4. 5. 6. 1. 2. 2. Remove the tank from the base of the machine by lifting the tank carry handle. 3. Carry the 2-in-1 tank to the sink. Rotate the handle forward to unlatch the lid. Lift off and set the lid aside. 4. Fill up the bladder with clean hand hot (140°F/60°C MAX) tap water. *Do not boil or microwave water as it can destroy the bladder. 5.
Operations Set ReadyTools dial Set ready tools dial to floor cleaning. ReadyTools Dial Power switch 1. Plug into a proper outlet and turn the power and heater switches to the ON ( I ) position. The switches are found on the back of the handle. Allow 1 minute for the built-in heater to warm-up before cleaning. The ProHeat will be fully warmed and will provide optimal performance after a minute of continuous heated cleaning. 2. The heater ready light indicates when the heater is ON ( I ).
Operations Empty the tank 1. Turn the power switch off. Remove the water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. 1. 2. 2. Empty collection water from bottom of tank.
Operations Cleaning with attachments Your deep cleaner comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level. 1. Important! If using to clean upholstery, check upholstery tags for instructions. a. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat.
Maintenance & Care WARNING Machine storage Once your cleaning is complete, make sure the water tank is emptied and rinsed out. Put the unit away in a closet or basement for the next use. To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. NOTE: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing.
Maintenance & Care Stain removal Do Not Delay! Attending to an accident soon after it occurs increases the chances for full removal. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula.
Troubleshooting Problem Heater ready light does not illuminate Reduced spray or no spray DirtLifter® PowerBrush does not turn WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Possible causes Remedies The heater switch is not turned ON ( I ). Turn ON ( I ) the heater switch. The machine power switch is not to turned ON ( I ).
Troubleshooting Problem Cleaner not picking up solution Possible causes Remedies ReadyTools dial may be on the wrong setting for the cleaning job. Set ReadyTools dial to either floor cleaning or tools. Nozzle window may not be properly attached. Press down firmly on the black oval gasket at the top window to make sure the two tabs on the back of the nozzle window are snapped into the mating slots in the main housing. 2-in-1 tank lid is not properly installed. Re-install lid; refer to page 9.
Replacement Parts These items are available for your BISSELL deep cleaner. Call 1-800-237-7691 or visit www.BISSELL.
Accessories These items are available for your BISSELL deep cleaner. Call 1-800-237-7691 or visit www.BISSELL.com PART # PART NAME PART # PART NAME 203-9201 4" Upholstery Tool 203-6655 Spraying Crevice Tool 203-6652 TurboBrush® 203-7154 Pet Stain Eraser® Tool 215-9155 3" Tough Stain Brush 2037412 Deep Reach Pet Tool *Not all parts are included with every model. 18 www.BISSELL.
Warranty Service Limited One-Year Warranty Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
