User Guide

Machine storage
Once your cleaning is complete, make sure
the water tank is emptied and rinsed out. Put
the unit away in a closet or basement for the
next use.
NOTE: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Turn power and heater switches OFF ( 0 ).
Unplug the machine and wrap the power cord.
2. After emptying the water tank, rinse it out
at a faucet with running hand hot tap water,
taking care to clean underneath the heavy duty
bladder, and all around it. Clean out lint trap.
3. Replace the 2-in-1 Tank on the machine.
4. Clean out the flow indicator filter each time
it is used to ensure best cleaning performance.
Unscrew the flow indicator cap, lift out the red
rotor and white filter. Rinse all three parts with
water. Replace the filter and rotor. Replace
the flow indicator cap. Turn until snug, do not
over-tighten.
5. Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
6. Wipe the machine’s exterior with a soft cloth.
7. After carpet is dry, vacuum again to remove
hair and fuzz.
Mainnce & Care
www.BISSELL.com
13
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Flow
Indicator
Filter
Cap
Rotor
4.