User Guide
www.BISSELL.com
16
Trbleshting
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Problem Possible causes Remedies
Cleaner
not picking
up solution
ReadyTools dial may be on the
wrong setting for the cleaning job.
Set ReadyTools dial to either floor
cleaning or tools.
Nozzle window may not be
properly attached.
Press down firmly on the black oval
gasket at the top window to make
sure the two tabs on the back of the
nozzle window are snapped into the
mating slots in the main housing.
2-in-1 tank lid is not properly
installed.
Re-install lid; refer to page 9.
2-in-1 tank is not properly seated.
2-in-1 tank must be firmly seated to
function; remove and reseat 2-in-1 tank.
Poor tool position. (Hand held
attachments only).
Adjust angle; apply more downward
pressure.
2-in-1 Tank has picked up
maximum dirty water.
Empty 2-in-1 tank, refer to page 11.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
Please do
not return
this product
t o t h e s t o r e .