User Guide

www.BISSELL.com
8
Operatis
ReadyTools Dial
This provides either floor cleaning or above the
floor cleaning with the flip of a switch. Attach
tool to the hose, and you are ready to go!
Flow Indicator
This is located on the machine base. It spins
when the trigger is pressed to indicate that the
machine is applying cleaning solution to the
carpet and will stop spinning when the formula
tank or bladder needs to be refilled, or when the
trigger is released.
NOTE: Flow Indicator does not spin when
spraying through the attachment hose.
NOTE: Filter is located inside flow indicator
Before you clean
1. Plan activities to give your carpet time to dry.
2. Move furniture to another area if cleaning an
entire room (optional).
3. Thoroughly vacuum area with a dry vacuum
cleaner before deep cleaning.
4. Plan your cleaning route to leave an exit path.
It is best to begin cleaning in the corner farthest
from your exit.
5. Pretreating (optional)
NOTE: Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryways
and hallways.
a. Spray the BISSELL Stain PreTreat
formula onto heavy traffic areas, soiled
areas, or stains.
b. Allow to penetrate for at least 3 minutes.
c. Following the instructions below, clean as
normal, using your BISSELL ProHeat Pet on
the high traffic setting.
Flow
Indicator
ReadyTools
Dial
2
4'
3'
1
3
4
5
6
7
9
10
11
12
EXIT
START
HERE
ATTENTION
Some Berber carpets have a tendency to fuzz
with wear. Repeated strokes in the same area
with an ordinary vacuum or deep cleaner
may aggravate this condition. Please see Stain
Removal instructions on page 14.