USER’S GUIDE 89Q9/18Z6 SERIES 3 Safety Instructions 4 Product View 5-6 Assembly 6-9 Operations 10-15 Maintenance and Care 16-17 Troubleshooting 18 Consumer Services 18 Additional Accessories 19 Replacement Parts 20 Warranty
Thank you for buying a BISSELL Multi Cyclonic vacuum We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts. Your carpet cleaner is well made, and we back it with a limited one-year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your upright VACUUM. Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. ■ Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. ■ Turn off all controls before plugging or unplugging vacuum cleaner.
Product view Handle Pet TurboBrush® Release Switch Power Switch Cord Clip Brush On/Off Switch Dusting Brush/ Upholstery Tool Quick Release Cord Wrap Stretch Hose Twist n' Snap Hose Connection Crevice Tool Dirt Container Lock 'n Seal® Lever Pre-Motor Filter Hose Clip Telescoping Extension Wand HEPA Media Post-Motor Filter Headlight Hose Grip Height Adjustment Knob Furniture Protection Guard Powerfoot Handle Release Pedal Hose Grip Base caution: Do not plug in your vacuum cleaner until you a
How to use this guide This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL vacuum. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Assembly 3. Attach vacuum hose and tools continued 3. Snap the telescoping extension wand, crevice tool, and combination tool into storage clips as shown. 4. The Pet TurboBrush snaps on to the holder on the front of the handle. Crevice Tool Combination Tool Place the Pet TurboBrush in the holder by hooking the bottom onto the tab and pushing the top of the TurboBrush into place.
Operation Tip: Power height adjustment Before cleaning under low furniture, check area first for objects that might harm the unit or block the Vacuum Hose. The powerfoot on your vacuum can be adjusted to clean several floor surfaces. NOTE: For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. 1. Place handle in upright position. 2. Turn height adjustment knob to desired setting.
Operation Special tools continued Pet TurboBrush®: Use for removing dirt and pet hair from stairs, upholstery, area rugs, and other small areas. Pull towards you in a raking motion. Note: Pet TurboBrush is designed to remove pet hair from upholstered or carpeted surfaces. It should not be used on pets. Stair cleaning tool (select models only): Use for stairs, area rugs, and other small carpeted areas. This tool can also be used for bare floors. Note: The stair cleaning tool does not store on board.
Operation Cleaning with the detachable canister The detachable canister feature makes it possible to easily take the powerful cleaning action of your BISSELL Lift-Off Multi Cyclonic Pet to stairways, auto interiors, and other hard-to-reach areas of your home. Before detaching the canister, your vacuum must be in its fully upright position. You do not need to turn off the power first. 1. Press the release button at the top of the canister handle and lift the canister to remove. 2.
Maintenance and care To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the dirt container when the dirt reaches the “Full” line on the front. 2. Check the pre-motor filter at least once a month and clean and replace as needed. 3. Replace the HEPA media post-motor filter every six months.
Maintenance and care Cleaning the secondary cyclone 1. Unplug the cleaner from electrical outlet. 1. The secondary cyclone can be reached by removing the dirt container, reaching underneath the upper tank and turning the rim of the frame to unlock. Pull straight down to remove. 2. The cyclone and screen may be separated for cleaning. Simply pull up on the screen to separate. 3. The upper tank may also be wiped clean with a damp cloth. Cleaning the pre-motor and post-motor filter 1.
Maintenance and care Rotating brush and drive belt maintenance Check your vacuum cleaner’s rotating floor brush and drive belt regularly for debris, wear or damage. Debris can wrap around the brush and hamper its ability to effectively clean your carpet. 1. Unplug cleaner from electrical outlet. 2. Remove detachable canister from vacuum cleaner 3. Recline handle and turn vacuum cleaner over so bottom side is up. 4. Remove the six screws as shown with a Phillips head screwdriver.
Maintenance and care Replace light bulb 1. Unplug cleaner from electrical outlet. 2. Remove detachable canister and recline handle of vacuum. 3. Using a screwdriver, remove the one screw as shown and lift off the lens. 4. Remove the bulb from the socket by grasping bulb and pulling straight out. Install the new bulb by pushing it gently into the socket until the bulb snaps into place. 5.
Maintenance and care Cleaning clogs 4. Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. 1. Unplug cleaner from electrical outlet. 2. Empty Dirt Container. 3. Check Upper Tank for build up or clogs. 4. Remove the secondary cyclone and check the suction inlet for a clog. 5. Grasp the Hose Grip and lift to separate from the suction opening.
Maintenance and care Thermal protector An internal thermal protector has been designed into your cleaner to protect it from overheating. When the thermal protector activates, the main vacuum motor will stop operating. If this happens, proceed as follows: 1. Turn the cleaner OFF (O) and unplug from electrical outlet. 2. Check the secondary cyclone area, PreMotor Filter and Post-Motor Filter for dirt accumulation. 3. Refer to the "Clearing Clogs" section. 4.
Troubleshooting W ARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Vacuum cleaner won’t run Possible causes Remedies 1. Power cord not firmly plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker 3. Thermal protector activated 3.
Troubleshooting Visible dirt escaping from cleaner Possible causes Remedies 1. Dirt container full 1. Empty dirt container 2. Filter or secondary cyclone missing or installed incorrectly 2. Check secondary cyclone, pre-motor and post-motor filter for correct installation 3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly Other maintenance or service not included in the manual should be performed by an authorized service representative.
BISSELL consumer service For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. ET 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare, Inc. PO Box 3606 Grand Rapids, MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available.
Replacement parts – BISSELL Lift-Off Multi Cyclonic Pet series You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near you, or to place an order using Visa, MasterCard, Discover or American Express, call BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. ET 9 a.m. — 8 p.m. ET Or visit our Website - www.bissell.com Item Part No.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.