Manual

Carpet cleaning(centinued_
2. Removeformula tank from backof machine.
2a,
2b.
Fill the formula tank byfirst unscrewingthe
capand insert.AlwaysusegenuineBISSELL
formulastomaximizecleaningandforthe
safetyof yourmachine.Fillformulaupto the
lineandreplacethe capand insert.Place
formulatank intotheslot inthe backof the
machinefor a snugfit.
If usingthe BISSELL3X ConcentratedFiber
CleansingFormula:Add 3 capfuls of 3X
ConcentratedFiberCleansingformula to the
formula tank,and then fill with warm water
to the line.
4.
5.
www.bissel
SetCustomCleanDial.Simplychoose one
of the 4 settings (heavytraffic,normal clean,
light clean,or water rinse)and the PreHeat
2Xwill adjust the right amount of cleaning
solutionto mix with the heatedwater to fit
your cleaningneed.
SetReadyToolsDialto thefloorcleaningsetting.
Plugintoa properoutletandturnthepower
andheaterswitchesto theON( I) position.Allow
1 minuteforthebuilt-inheaterto warm-upbefore
cleaning.ThePreHeat2Xwill befullywarmedand
willprovideoptimalperformancea_era minuteof
continuousheatedcleaning.
CleaningStrokes.Whilepressingthetrigger,
makeoneslowforwardwet passandanother
oneback.Letthebuilt-inheater,formula,and
DirtLifterPowerBrushesdotheworkforyou.
Caution:DonotoverweLTakecarenotto run
overlooseobjectsor edgesof arearugs.Stalling
brushmayresultin prematurebeltfailure.
Note:Yourmachineisequipped witha
circuitbreaker that will automaticallyshut
off the brushifa largeor leaseobject is
caughtinthe brushroll.If that happens,he
sureto unplugyour machine,removethe
foreign object,and then plugthe machine
backin to resetthe circuitbreaker.
Releasethe triggerand make oneslow
forward and backwardpassover the same
areato removeany residualdirtywater and
aid in drying. Repeatcleaningpassesuntil
solution beingpulledup appearsclean.
Continuepasseswithout pressingthe trigger
until you can't see any morewater
beingpulled up.
[.com
PowerSwitch
HeaterSwitch
800.237.7691