Manual

and car8
Machine care (continued)
5. The insideof theend capsby the brushrolls
can bewipedoutwith a cleanpapertowel,
or, if a morethoroughcleaningis desired,the
end capscan betakenoff usinga Phillips
head_ screwdriverandrinsedclean.
ReplacWaftercleaning.
6=
Anyloosehairordebriscanbe pulledfromthe
brushrollsandthrownaway.Forthe most
thoroughcleanbeforestorage,followdirections
on pages17& 18for removalandreplacement
d thebrushrollsandbelts.
7=
=
Tocleanattachmentsthat mayhave been
used,removefrom hoseand rinse in clean,
runningwater.Dryand replaceattach-
mentin the tool caddy.Cleanthe hoseby
suctioningcleanwater from the tap. Before
replacing,lift end of hoseandstretch outto
ensure all water is clearedfrom hose.Refer
to page 13, illustrations9 & 10.
After carpetis dry,vacuumagainto remove
hairand fuzz.
Small bert removal and replacement
Occasionalreplacementof oneor both belts
maybecomenecessary,if thatis needed,please
followtheinstructionsbelow.
1. Turnoff themachine,and unplugit from
the outlet.
2. Removeboth the 2-in-t water tank and the
formula tank. Setaside.
3. Unscrewthefront nozzleand removeit.
Setaside.
4. Turnthe machineon its side.
IMPORTANT:cordside down.
5. Removetheclear end cap by unscrewing
the 2 black screws.Takecare notto drop
the screws intothe unit.
g,
18 www.
6. Remove1 silver screw.
7. Removepivotarm by gently lifting up.
8. Removesmall brushbelt.
Replacesmallbrushbelt,andreverse
stepsabove. _El
bissell.com 800.237.7691