Manual

Reduce Spray or No Spray (continued)
PossibleCause
1. Watertank maybeempty.
2, Formulatank maybeempty.
3, Tankmaynotbeseatedcompletely.
4. Pumpmayhavelost prime.
DirtLifter Powergrushes do not turn
PossibleCause
1. Thebrush isoff or broken.
2, Theunit is in the upright position.
3. Circuitbreakermayhavetripped.
Cleaner not picking up solution
PossibleCauses
1. ReadyToolsdial maybeatwrongsetting.
2. Tankmaynot beseatedproperly.
3. Tankmaynot beassembledproperly.
4. Solutionor 2-in-1 water tank is empty.
5. 2-in-1 water tank haspicked up
maximumdirty water and redfloat
doorhasclosed.
6, Redfloat "door"inthetankmayhaveclosed
asa resultof bumpingan objector moving
machinebackandforthtooquickly.
20 www.bissell.com
Remedies
1. Fillheavyduty_ladderwith lot tapwater.
2. Fillformula tank with BISSELLFiber
CleansingFormulafor cleaning.
3. Turnpower OFF( O ). Removeand
reseattank.
4. Turnpower OFF( O ) andthen back
ON( I ).Waitone minute,then
depressTrigger.
2.
3.
Remedies
1. TurnpowerOFF( 0 ) andunplugunit
from outlet.Followinstructionson
page17.
Brushesonly rotate whenunit is
reclinedusingthe detent pedal.
Turnthe machineOFF( 0 ) and
unplugfromoutlet.Checkto seeif
foreignobjectis caughtin brushroll.
Removeobject.Plugmachinebackin
to resetcircuit breaker.
Remedies
1. SetReadyToolsdialto eitherFLOOR
CLEANINGorTOOLSsetting.
2. Pickup boththe2-in-1 water
tankandformulatankandreseat
themso theyfit snuglyonthe unit.
3. Checkto make sure the "lip" of
the nozzleis securelyhooked
intothe grooveon bottomof
Tank(seepage9).
4. Checkfluidlevelsinheavyduty
bladderandformulatank.
5. Empty2-in-1 water tank. Refill
heavyduty bladderwith clean
hottap water and replace.
6. TurnthemachineOFF( 0 ),
allowingredfloatdoorto releaseinto
theopenposition.Turnunitback
ON( I ) to continuecleaning.Be
sureyourforwardandbackward
strokesaredoneat aslowerpace.
800.237.7691