User`s guide

Operation
15
www.bissell.com
Hard floor cleaning (Continued)
4. Fill the water tank with hand hot tap water
and set aside.
5. Attach the hard floor tool onto the floor
nozzle with the long tab to the right side of
the floor nozzle. First attach left side (short
tab) catching tab over nozzle edge. Gently
bend long tab (right side) outward to easily
snap over edge of clear nozzle on left.
6. Set the ReadyTools dial to Floor Cleaning.
7. Set the SmartMix dial to Normal.
8. Plug into an outlet and turn the power
switch ON ( I ).
9. Slowly move the machine forward and
back over bare floor surface one time while
pressing trigger. Caution: Do not overwet.
10. Repeat the motion without pressing the
trigger. This allows the bare floor tool to
squeegee and suction up the dirty water.
11. Allow approximately 30 minutes for
floors to dry.
12. Remove hard floor tool and rinse and dry
before storing.
13. If any formula remains in the formula
tank, pour it back into the Hard Floor
Solutions bottle for use the next time.
14. Rinse out the formula tank.
Hard Floor
Cleaning Tool
Bottom Front Edge
of Floor Nozzle
Snap Together
ug310-5822_8910E_107.indd 15ug310-5822_8910E_107.indd 15 1/7/07 8:44:47 AM1/7/07 8:44:47 AM