User`s guide

www.bissellcommercial.com 855.544.7336
7
Maintenance and care
To Adjust the Carpet Height Setting
Before attempting any service of your
vacuum, unplug the vacuum from the
electrical outlet.
Removing the Vacuum Bag
1. Open the front door by pulling the black
lever on the front cover towards you
2. When door is open, pull the yellow
handle towards you
3. Place finger in the middle circle at the
top of the bag and pull slowly.
4. Then place fingers in the two outside
holes at the top of the bag and pull
entire bag out slowly
5. Dispose of full bag and insert new bag
by sliding it in below the yellow handle.
6. Push yellow handle back in to secure.
1. Turn Vacuum off and unplug from the outlet
2. Turn the adjustment knob on the foot of the
vacuum to the desired setting
3. Turn vacuum ON and begin to vacuum.
If the vacuum is too hard to push, unplug
from outlet again and adjust to the next
setting until easy to use.
Full Bag Indicator
When the bag is full the whistle
mechanism on the side of the unit will
sound. This whistle is to alert you that
your bag is full. Please throw away
current vacuum bag and replace with
a new empty bag.
To Replace Exhaust Filter
The exhaust filter should be replaced
every 6 months, or when dirty.
1. To replace: lift up on the exhaust filter
cover. Remove old filter and replace with
new one.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.