CleanView® II B A G L E S S USER’S GUIDE 3574/3576 SERIES 3 Safety Instructions 4 Product View 5-6 Assembly Instructions 6-8 Operation / Special Tools 8-11 Maintenance 12-13 Troubleshooting 14 15 16 Warranty Replacement Parts Consumer Services
Thanks For Buying A BISSELL CleanView® II We’re glad you purchased a BISSELL CleanView II Vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home vacuuming system. Your BISSELL CleanView II is well made, and we back it with a limited comprehensive one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM. Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Cord Clip Hose Clip Handle Stretch Hose Carrying Handle Quick Release Cord Wrap Power Cord Stair Cleaning Handle Power Switch Crevice Tool Quick Reach® Handle Extension Wand Louvers Combination Dusting Brush/ Upholstery Tool Hose Wand Upper Tank Hose Wand Base Dirt Container Filter Cup Inner and Outer Circular Filters Foot Hose Headlight Post-Motor Filter Optional Hepa Media Filter (Select Models Only) Lock ’n Seal™ Lever Handle Release Pedal Height Adjustment Knob Furniture Protection Guard P
How To Use This Guide This User’s Guide has been designed to help you get the most satisfaction from your BISSELL CleanView II. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Attach Vacuum Hose and Tools Continued 4. Snap the Extension Wand and the Crevice Tool together into the storage clip as shown. 5. Snap the Combination Tool into the storage clip as shown. How To Use Your Vacuum Handle Positions Press the Handle Release Pedal with your foot to place your vacuum in one of three cleaning positions. 1. Upright- For storage and above floor cleaning with tools. 2. Normal Cleaning- Press Handle Release Pedal once. Use for most household floor cleaning tasks. 3.
Transporting Cleaner Carrying Handle 1. To move your cleaner from room to room, put the Handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the Carrying Handle on the back. 3. Use the Stair Cleaning Handle on the front to hold your vacuum while cleaning stairs.
Power Cord Storage When you are done using your vacuum, return it to the Upright position and store the Power Cord. 1. Turn vacuum cleaner off. 2. Unplug Power Cord by grasping the polarized plug (NOT the cord) and disconnect from outlet. 3. Loop Power Cord around Cord Wraps on side of vacuum NOTICE: While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. cleaner.
Cleaning The Inner & Outer Circular Filters Use only BISSELL Style 9 Replacement Filters in your BISSELL CleanView II. 1. Unplug the cleaner from electrical outlet. 2. Remove the Dirt Container as described in the previous section. Grasp the Filter Cup located at the bottom of the Dirt Container and twist counterclockwise to unlock and remove. 3. Grasp the Circular Filters and twist to unlock. Pull straight up to remove. 4. Separate the Outer foam and Inner pleated Circular Filters.
Check Rotating Floor Brush and Drive Belt You should check your vacuum cleaner’s Rotating Floor Brush and Drive Belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover. 1. Unplug cleaner from electrical outlet. 2. Place handle in Low position and turn vacuum cleaner over so bottom side is up.
Replace Lightbulb Use only BISSELL Replacement Bulb (#203-1007) in your BISSELL CleanView II. 1. Unplug cleaner from electrical outlet 2. Using a flat screwdriver, table knife or coin, insert into the slot on the right of the Lens and gently push inner latch to the left as shown to remove the lens. 3. Remove the bulb from the socket by pushing in gently and turning it counterclockwise. Install the new bulb by pushing it gently into the socket and turning clockwise. 4.
Troubleshooting WARNING: To reduce the risk of injury from moving parts and/ or electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet before performing troubleshooting checks.
Troubleshooting Continued Tools won't pick up dirt continued Possible Cause Remedies 5 Dirt Container full Dirt Container or Upper Tank not installed properly Filters are dirty 6 Louver missing or installed incorrectly 3 4 3 4 5 6 Empty Dirt Container Position correctly and lock in place Check and clean Inner and Outer Circular filters, Pre-Motor and Post-Motor Filters Check for a clog in the tube in the center of the Dirt Container, clear and properly install Louvers Vacuum cleaner is difficult
Replacement Parts – BISSELL Cleanview II Series You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near you, or to place an order using Visa, MasterCard, Discover or American Express, call BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or visit our Website - www.bissell.com Item Part No.
BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. ET 9 a.m. — 8 p.m. ET Or write: BISSELL Homecare Inc. PO Box 3606 Grand Rapids, MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare Inc.
