Quick Start Guide

ManualsBrandsBissell ManualsWet/Dry VacuumsBissell CrossWave Pet Pro Multi-Surface Wet Dry Vacuum

Quick Start Usage Instructions

WARNING

Refer to the enclosed user guide for complete

instructions and important safety notices.

CROSSWAVE

PET SERIES

QUICK START GUIDE

2303, 2305, 2306, 2328 SERIES

161-3889 10/17 RevA

1. First, insert the handle

at the top of the body

of the machine until

you hear a click.

click

HARD FLOOR

BUTTON

RUG

BUTTON

LARGE AREA CLEANING

SMALL AREA CLEANING

2. For small area cleaning (<350 sq ft), ﬁll the

clean water tank with warm tap water to

the ﬁrst water ﬁll line. Then add formula to

the ﬁrst formula ﬁll line.

For large area cleaning (up to 700 sq ft),

ﬁll the clean water tank with warm tap

water to the second water ﬁll line. Then

add formula until you get to the second

formula ﬁll line. Screw the cap back onto

the clean water tank.

3. On the back of the

machine, align clean

water tank with the

grooves and slide tank

into place until you

hear a click.

4. Turn machine on by

selecting the type

of ﬂoor you will be

cleaning. For hard

ﬂoors, choose the

HARD FLOOR button

and for area rugs push

the RUG button.

5. Each time you use the

product, hold the solution

trigger for 10 seconds to

prime the system with

cleaning solution before

you begin cleaning. When

you hold the trigger, LED

lights will illuminate.

When solution is ﬂowing,

you will see bubbles

forming at the edges of

the brush roll window.

You are ready to start

cleaning with your

BISSELL® CrossWave® Pet!

Summary of content (2 pages)

PAGE 1
QUICK START GUIDE 2303, 2305, 2306, 2328 SERIES CROSSWAVE® PET SERIES WARNING Quick Start Usage Instructions Refer to the enclosed user guide for complete instructions and important safety notices. SMALL AREA CLEANING click HARD FLOOR BUTTON LARGE AREA CLEANING RUG BUTTON 1. First, insert the handle at the top of the body of the machine until you hear a click. 2. For small area cleaning (<350 sq ft), fill the clean water tank with warm tap water to the first water fill line.
PAGE 2
QUICK START GUIDE For further instructions reference the User Guide or visit www.BISSELL.com Getting the Best Clean from Your CrossWave® Pet For everyday Cleaning: HARD FLOORS & RUGS Choose the setting that matches the floor type you will be cleaning. Prime the system first by holding the solution spray trigger for 10 seconds. When you’re ready to clean, hold the trigger on both the forward and backward pass for great cleaning results.