CROSSWAVE® PET PRO _______________ USER GUIDE 2305, 2306 SERIES
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR CROSSWAVE® PET PRO. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. » Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing. » Use indoors only.
Thanks for buying a BISSELL CrossWave® Pet Pro We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your multi-surface cleaner works as well in two years as it does today, so this guide has tips on using (pages 6-8), maintaining (pages 9-13), and if there is a problem, troubleshooting (page 14).
Getting to Know Your CrossWave® Pet Pro 1 2 9 10 11 6 12 3 7 4 13 5 1 8 Upper Handle 8 Foot 2 SmartClean Fingertip Controls 9 Solution Spray Trigger 3 Strainer 10 Quick Release Cord Wrap 4 Float Stack 11 Clean Water Tank 5 Easy Remove Brush Window 12 Lower Cord Wrap 6 Integrated Carry Handle 13 Rinse Cup 7 Dirty Water Tank 14 Rinse and Storage Tray Your BISSELL CrossWave® Pet Pro machine comes in three easy to assemble components and does not require any tools to assembl
Assembly WARNING Do not plug in your CrossWave® Pet Pro until you are familiar with all instructions and operating procedures. 1 Insert handle into body of unit until you hear a click. Then, on the back of the machine, align clean water tank with the grooves and slide tank into place until you hear a click. 2 click 3 Wrap the cord around the quick release cord wrap and the lower cord wrap.
Filling Your Clean Water Tank 1 The clean water tank is located on the back of the machine. 2 3 Clean Water Tank Dirty Water Tank Unscrew the cap from the clean water tank. Lift the clean water tank straight up to remove from the machine. The clean water tank has two measuring volumes depending on the amount of space you would like to clean. 4 For large area cleaning (up to 700 sq ft) For small area cleaning (<350 sq ft) a. Fill formula tank with warm tap water to the second water fill line. a.
Cleaning Your Hard Floors 1 2 3 Select cleaning mode: Plug machine into a properly grounded outlet. To start cleaning your hard floors, turn the machine ON pressing the HARD FLOOR button. Once the setting is selected, the dry vacuum will turn on. To turn OFF, press the HARD FLOOR setting a second time. 4 Before each use, hold the solution spray trigger for 10 seconds to prime the system with cleaning solution. LED lights illuminate when holding the trigger.
Cleaning Area Rugs NOTE: Before cleaning area rugs, test an inconspicuous area of the rug for colorfastness. Also, please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. Not for use on silk or delicate area rugs. 1 2 3 Select cleaning mode: Plug machine into a properly grounded outlet. To start cleaning your rugs, turn the machine ON pressing the RUG button. Once the setting is selected, the dry vacuum will turn on.
Maintenance: Rinse and Storage Tray WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 2 1 Place unit on rinse and storage tray. 4 3 Fill rinse cup with water. 6 5 Turn the machine ON by pressing the Hard Floor button. Pour water into rinse funnel to fill the MAX line of the rinse and storage tray. Recline the machine while in storage tray.
Maintenance: Rinse and Storage Tray (cont.) WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 9 Replace brush roll by inserting the brush roll end into the right side of the foot. Then lock the pull tab into place by pressing downward. 10 Replace the brush roll window by first lining up the brush window tabs with the edges of the foot.
Maintenance: Dirty Water Tank WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 2 1 To release dirty water tank, press down on recessed button on the top of the dirty tank. 3 Grab the front handle while pressing down on button and pull dirty water tank away from the unit.
Maintenance: Dirty Water Tank (cont.) WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 10 9 If the inside area where the dirty water tank sits is dirty, wipe it clean with a rag or towel. Leave parts out to dry before reassembling. 11 Place vacuum filter back into the top of the dirty water tank.
Maintenance: Brush Roll and Chamber WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 Grasp brush roll window at the front and pull upward to remove. 2 3 4 With warm water, rinse your brush roll window and brush roll. If your brush roll chamber is dirty, clean with a rag or towel. Pull brush roll out by grabbing the brush roll tab and pulling upward.
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail or telephone as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points and Alerts Automatically earn points for discounts and free shipping on future purchases. We’ll contact you with any important product maintenance reminders and alerts. Faster Service Special Promotions Supplying your information now saves you time should you need to contact us with questions regarding your product.