Earn BISSELL Rewards! Register your product today! See details on back page ® USER'S GUIDE 25A3 SERIES 2 Thank You 3 Safety Instructions 4-5 6 7-14 Product View Assembly Operations 15 Maintenance and care 16 Troubleshooting 17 Replacement Parts 18 Accessories 19 Warranty 20 Product Registration 20 Consumer Services
Thanks for buying a BISSELL PROheat® We’re glad you purchased a BISSELL PROheat deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts. Your BISSELL PROheat deep cleaner is well made, and we back it with a limited one year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your PROheat®. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not immerse. ■ Use only on surfaces moistened by cleaning process. ■ Always connect to a properly grounded outlet. ■ See Grounding Instructions.
Product view Ergonomically Designed Handle Tough Stain Tool Handle Assembly Heat Indicator Light/Built-in Hot Water Heater Heater Switch: turn heat on or off as needed Lower Body Assembly Integrated Carry Handle Ready Tools™ Dial Removable Nozzle Belt Access Door Edge Sweep® Brushes Dirtlifter® PowerBrush Keep plenty of genuine BISSELL 2X advanced cleaning formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
Product view Spray Trigger Cord Clip Quick Release™ Cord Wrap Hose Secure Latch Extra Long Power Cord Ready-To-Use Hose Handle Release WARNING: To reduce the risk of fire and 2-in-1 Tank™ includes built in formula measuring cup electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Non-BISSELL cleaning solutions may harm the machine and void the warranty.
Assembly Your PROheat comes in four, easy to assemble components: Handle Assembly Upper Hose Rack Lower Body Lower Hose Rack The only tool you will need to assemble your cleaner is a Phillips head screwdriver. Warning: Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures. 1. Slide handle assembly onto lower body and secure with two long screws. 2.
Operations Special Features 1. Your BISSELL PROheat deep cleaner is a home cleaning system that uses a combination of heat, BISSELL advanced cleaning formula, brush agitation and suction to safely clean carpets. 1. Built-In-Heater BISSELL PROheat models feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 180 degrees.
Operations Special Features continued 4. Scotchgard™ Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer.
Operations Before you clean 1. Move furniture to another area if cleaning an entire room (optional). 2. Vacuum area with a dry vacuum cleaner before deep cleaning. EXIT 12 3. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 5 9 10 11 7 6 2 4 3 1 T STAR E HER 3' 4' 4.
Operations Carpet cleaning 1. Plug the deep cleaner into a proper outlet. Set ReadyTools dial to the "FLOOR CLEANING" setting. Turn the power on by pressing the red power switch on the back of the unit with your foot. Turn heater switch (located on side of unit) to the on position. Allow one minute for the built-in heater to warm up before cleaning. Tip: Thorough vacuuming before deep cleaning will prevent early clogging of the lint trap.
Operations Empty the 2-in-1 water tank/ clean removable nozzle 1. Turn power switch off. Remove the 2-in-1 water tank from the base using the tank carry handle. Carry the tank like a bucket to a utility sink or outside where you will dispose of the collection water. Remove the top of the tank by rotating the handle forward to unlatch lid and lifting lid off tank. 3. 2. Empty collection water from bottom of tank. 3. After each use, remove and rinse the lint screen located on the tank lid. 4.
Operations ReadyTools™ Your PROheat deep cleaner comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. Important! If using the machine to clean upholstery, check upholstery tags. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your PROheat. If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only,” do not proceed. Do not use on velvet or silk.
Operations ReadyTools™ Continued 11. It is recommended that you suction clean water from the tap to rinse out the hose. 11. 12. 12. Before wrapping hose onto tool rack, lift end of hose and stretch out to ensure all water is cleared from hose. 13. Wrap flex hose around tool rack. 14. Empty 2-in-1 water tank and rinse out, following instructions on page 11. 15. If the ReadyTools dial becomes difficult to turn, the diverter assembly that holds the dial may need to be cleaned.
Operations Hard Floor Cleaning WARNING: Select Models Only To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL bare floor tool kit 203-5641 must be used and it must only be used with BISSELL Hard Floor Solutions or BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. Your deep cleaner may have included a hard floor tool and Hard Floor Solutions Formula. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
Maintenance and care Machine care For best results, a few simple steps can assure your machine is well maintained after cleaning is complete. 1. Flush your machine of any remaining residual solution. a. Fill the 2-in-1 clean water tank (bladder) with clean hot tap water. b. Plug your machine into a proper outlet and set the ReadyTools dial to the "FLOOR CLEANING" setting. Turn the power on by pressing the power button. c.
Troubleshooting Heat indicator light does not illuminate: Possible causes Remedies 1. The heater switch is not turned on. 1. Turn on the heater switch located on side of unit 2. The machine power switch is not turned on 2. Both switches must be on to activate the heat indicator light. Reduced or no spray Possible causes Remedies 1. Bladder may be empty. 1. Refill bladder with hot tap water 2. 2-in-1 tank may not be seated properly. 2. Remove and reseat 2-in-1 tank 3.
Replacement parts - BISSELL PROheat ® Item 1 2 3 4 5 6 1 Part No. 203-0104 203-0102 203-0124 215-0628 015-0621 203-0105 2 www.bissell.com Part Name Tank Assembly Complete Tank Base Removable Nozzle Replacement Pump Belt (with instructions) Replacement Brush Belt 1 Pack (with instructions) Lint Screen 3 4 5 6 800.237.
Accessories These items are available for purchase as accessories for your BISSELL PROheat: To purchase call 1-800-237-7691 or visit www.bissell.com. Item Part No.
Warranty - BISSELL PROheat ® This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.