USER'S GUIDE 34C9, 44L6 SERIES 220-240V 2 Thank You 3 Safety Instructions 4 Product View 5 Assembly 6-11 Operations 12 Maintenance and Care 13 Troubleshooting 14 Replacement Parts 14 Accessories 15 Warranty 16 Consumer Services
Thanks for buying a BISSELL CleanView® PowerBrush We’re glad you purchased a BISSELL CleanView® PowerBrush. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts. Your BISSELL CleanView® PowerBrush is well made, and we back it with a limited two-year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: ■ Remove plug from electrical outlet before Read all instructions before using your deep cleaner.
Product view Ergonomically Designed Handle™ WARNING: To reduce the risk of fire and electric Handle Assembly shock due to internal component damage,use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty.
Assembly Your CleanView® PowerBrush comes in five easy to assemble components: • Handle assembly • Upper body assembly • Upper hose rack • Lower body assembly • Lower hose rack Three Phillips head screws are included and can be found taped to the handle assembly. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper body assembly onto lower body and secure with two screws. 2.
Operations Special features Your BISSELL CleanView® PowerBrush is a home cleaning system that uses a combination of hand hot tap water, BISSELL advanced cleaning formula, brush agitation and suction to safely clean carpets. DirtLifter™ Powerbrush The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights.
Operations Special features continued Scotchgard™ Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer. Before you clean 1. Plan activities to give your carpet time to dry. 2.
Operations Fill the 2-in-1 water tank 1. Remove the tank from the base of the machine by lifting the tank carry handle. 2. Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup. 1. 2. 3. Fill with BISSELL 2X formula to the indicated fill line on the built in measuring cup and pour into mouth of the bladder. 3. 4 4. Fill the bladder with clean hand hot tap water.
Operations Carpet cleaning 1. Plug the deep cleaner into a proper outlet. Turn the power ON by pressing the red power switch on the back of the unit with your foot. 2. With your foot, press the gray handle release lever located on the back of unit below water tank. Handle Release Power Switch 3. While pressing the spray trigger, make one slow forward wet pass and another back. Let the BISSELL 2X deep cleaning formula and DirtLifter PowerBrush do the work for you. Caution: Do not overwet. 4.
Operations Empty the 2-in-1 water tank/clean removable nozzle continued 6. To continue carpet cleaning, refer back to pages 8 through 9, beginning with “Fill the 2-in-1 water tank” on page 8. If cleaning is complete, refer to the “Maintenance and care” section on page 12. Ready Tools™ bvh g kvh gh j j h d b lg fd hn l kl sd jkn f h Ad bj jh b j cv hh gcg Your CleanView® PowerBrush comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more.
Operations Ready Tools™ continued 9. Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction dirty water. Continue to clean in the area, working in small sections, until dirt is removed. Caution: Do Not Overwet. 12. 11. 10. When finished cleaning, remove and rinse tool(s) in clean, running water. 11. It is recommended that you suction clean water from a bowl to rinse out the hose.
Maintenance and care Machine care For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power switch OFF. Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it with running hot tap water, taking care to clean underneath and around the heavy duty bladder. Clean out red lint screen. Removable nozzle may be rinsed if necessary. Refer to page 9. 3. Replace the 2-in-1 water tank on the machine. 4.
Troubleshooting WARNING: To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Reduced Spray OR No Spray Possible causes Remedies 1. Bladder may be empty. 1. Turn power switch OFF; Refill bladder with clean hot tap water. 2. 2-in-1 tank may not be seated properly. 2. Turn power switch OFF; remove tank and reseat tanks. 3. Pump may have lost prime. 3. Turn power switch OFF; after 1 minute turn ON and depress spray trigger. 4.
Replacement parts Item Part No. 1 2 3 4 5 6 203-0104 203-0102 203-8114 215-0628 015-0621 203-0105 1 Part Name Tank Assembly Complete Tank Base Removable Nozzle Replacement Pump Belt (with instructions) Replacement Brush Belt (with instructions) Lint Screen 2 3 5 4 6 Accessories and formula While not all of these parts may not have come with your machine, all are available to you for purchase, if desired. Item Part No.
Warranty - BISSELL CleanView® PowerBrush This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as described below, or contact your local in country distributor.
BISSELL consumer services If your BISSELL product should require service: Call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. If you have questions about your warranty or need replacement parts please contact the numbers below.