User`s guide

Operations
Fillthe2-in-1watertank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate
the handle forward to unlatch the lid.
Remove lid, turn over and locate built
in measuring cup.
3. Fill with BISSELL 2X formula to the
indicated fill line on the built in
measuring cup and pour into mouth
of the bladder.
4. Fill the bladder with clean hand hot
tap water.
*Do not boil or microwave
water as it can destroy the
bladder.
5. Replace the top of the tank by
matching the lid and tank edges.
Handle must be in the forward
position in order to replace lid.
Rotate the handle to the carrying
position to latch the lid.
Note: Remember to secure the lid
andtesttomakesureitissecure
beforepickingupthetank.
6. Place tank into machine base, seating
firmly in place. Rotate tank handle back
into latched position.
6.
Tip: Thorough vacuuming
before deep cleaning will prevent
early clogging of the lint trap.
WARNING:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning formulas
intended for use with the deep
cleaner. Non-BISSELL cleaning
formulas may harm the machine
and void the warranty.
5.
1.
2.
4
3.
www.bissell.com
8