User`s guide

Operations
6. To continue carpet cleaning, refer back
to pages 8 through 9, beginning with
“Fill the 2-in-1 water tank” on page 8.
If cleaning is complete, refer to the
“Maintenance and care” section on
page 12.
Ready Tools™
Your CleanView PowerBrush comes
equipped with a hose and at least
one attachment for cleaning stairs,
upholstery, and more.
Important! If using the machine
tocleanupholstery,checkuphol-
stery tags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your deep cleaner. If the tag is coded
with “X” or “S” (with a diagonal strike
through), or says “Dry Clean Only,” do
not proceed. Do not use on velvet or silk. If
manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2. Check for colourfastness in an
inconspicuous place.
3. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum
with a brush attachment and a crevice
tool to clean in fabric folds and tufts.
6. To begin cleaning with attachments,
follow the instructions on pages 7-8 for
filling the 2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS
setting. This will allow spray and suction
from the hose.
8. Attach the cleaning tool to the end of
the hose.
7.
Tip: To clean with sliding
crevice tool, slide brushes
forward to clean stain, slide
back to suction
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhffhl kllgh
Manufacturer’s tag
Emptythe2-in-1watertank/cleanremovablenozzlecontinued
www.bissell.com
10