U S E R ’ S G U I D E 5200 Flip-!t & 7340 Flip-!t Select Series 2 Thanks 3 Consumer Services 4 Safety Instructions 5 Product View 6 Features / Assembly 7-8 Operation 9-10 Clean-Up Storage 10 Troubleshooting 11 Replacement Parts 12 About Your Warranty ug603-6704_5200_306.
Thanks for buying a BISSELL Flip-It We’re glad you purchased a BISSELL Flip-It or Flip-It Select. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Flip-It is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Thanks for buying a BISSELL Flip-It (5200), or Flip-It Select (7340) For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. EST 9 a.m. — 8 p.m. EST Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your FLIP-IT® WARNING: To reduce the risk of fire, electric shock, or injury: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 4 Use indoors only. Do not leave FLIP-IT® when it is plugged in. Do not service FLIP-IT® when it is plugged in. Do not use with damaged cord or plug.
Spray Trigger Cord Clip Carry Handle Quick Release Cord Wrap Power Cord On/Off Switch Built-in Heater (On Select Models) Heater Indicator Light (On Select Models) Clean Tank Pleated Filter Dirty Tank Removable Gentle Clean™ Brush & Pad Wet Vacuum Suction Path Removable Wet Clean™ Nozzle NOTE: Model 7340 shown with Heater Dry Vacuum Suction Path CAUTION: Accessories: Keep plenty of genuine BISSELL Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule.
Special Features of Your BISSELL Flip-It Included with the purchase of your Flip It are the following Specialized Cleaning Accessories… The Flip-It was designed to give the user the ability to easily change between the Gentle Clean™ Brushes and Pads. 1. WARNING: Do Not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
How To Use Your Flip-It Hard Floor Cleaner Tip: 1. Remove the Clean Tank from the machine. 2. Unscrew the black cap on the bottom of the solution tank and remove the insert. When using a Dry Gentle Clean™ Pad, you may want to get it slightly damp by squeezing the trigger to saturate the pad. This will aid in the flow of water and formula to clean sticky grime and spots. 3. Filling the Clean Tank: Fill with BISSELL Formula to the formula fill line and fill with water to the Water Line.
Dry Vacuuming With the Dry Side of the unit facing forward, turn the unit on and begin cleaning. You will see dry dirt, crumbs and debris being collected in the Dirty Tank. You do not have to empty the dry debris before wet cleaning. Flipping From Dry to Wet Cleaning To change from dry vacuuming to wet cleaning simply flip the unit around! The Gentle Clean™ Brush or Pad and Squeegee will automatically be lowered to effectively clean and Dry all your Hard Floor Surfaces.
Dirty Tank Is Full While Wet Cleaning, you will see dirty water collected in the Dirty Tank. When the Tank is full, the white Float in the Dirty Tank will rise to the top, making a noticeable sound to let you know it is time to empty the Dirty Tank. Suction will stop when tank is full of water. When You're Finished Emptying The Dirty Tank Remove the Dirty Tank Lid. Then dump the dirty water and debris into the sink, toilet, laundry tub or outside.
Storing The Flip-It Tip: Your Flip It can be stored Ready-to-Use, by leaving water and formula in the unit. Be sure to remove wet Gentle Clean™ Pad before storing. If the Pleated Filter is rinsed with warm water to clean, it is recommended to leave it out of the unit to air dry before placing it back in the unit. WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Troubleshooting Water & Formula are draining out from the clean tank.
Replacement parts - BISSELL Flip-It 5200 & Flip-It Select 7340 Item Part No.
Warranty - BISSELL Flip-It This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.