Pet Hair Eraser® CORDED HAND VACUUM USER’S GUIDE 33A1 SERIES 3 Safety Instructions 4 Product View 4 Assembly 4-5 6 Operations Maintenance and Care 6-7 Troubleshooting 7 Consumer Care 7 Replacement Parts 8 Warranty
Thanks for buying a BISSELL Vacuum We’re glad you purchased a BISSELL Pet Hair Eraser corded hand vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL hand vacuum is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your HAND VACUUM. Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not modify the polarized plug to fit a ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ non-polarized outlet or extension cord.
Product view Handle Power Switch Dirt Container Dirt Container Release Latch Nozzle Release Button Flexible Rubber Contour Nozzle Filter Screen 16ft. Power Cord with Cord Wrap System Pre-Motor Filter Exhaust Assembly Your unit will come assembled and will require no tools to put together. Operations Power switch The power switch is located on the end of the curved handle. To turn hand vacuum ON ( I ), press up. To turn hand vacuum OFF ( 0 ), press down. 2. Cleaning with hard nozzle 1. 2.
Operations Cleaning with hard nozzle continued 3. 4. Replace with hard nozzle by lining up the bottom of nozzle to the bottom of the dirt container. Pivot upwards to snap into place. Make sure the nozzle has snapped securely into place before using. Cleaning with flexible rubber contour nozzle 1. 2. 3. 4. Turn hand vacuum OFF. Remove hard nozzle by pressing down on round nozzle release button.
Maintenance and care Cleaning the filter and screen 1. 2. 3. 4. 5. 6. 7. 4. Turn hand vacuum OFF. Unplug hand vacuum from electrical outlet. Disconnect dirt container and filter assembly from the unit. Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. 5. Separate filter assembly by grasping tabs on both sides of assembly and pull. For best results, periodically tap filter and screen against trash can to remove dirt that has collected.
Troubleshooting Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.
Warranty - BISSELL Pet Hair Eraser® Corded Hand Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.