Earn BISSELL Rewards! Register your product today! See details on back page USER'S GUIDE 47B2, 20R7, 40H5 and 40N7 SERIES 2 Thank You 3 Safety Instructions 4 Product View 5 Assembly 5-7 Operations 8 Maintenance and Care 9 Troubleshooting 10 Replacement Parts 10 Accessories 11 Warranty 12 Product Registration 12 Consumer Care
Thanks for buying a BISSELL Deep Cleaner We’re glad you purchased a BISSELL Deep Cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Deep Cleaner is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your DEEP CLEANER WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not immerse. ■ Use only on surfaces moistened by cleaning process. ■ Always connect to a properly grounded outlet. See Grounding Instructions. ■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product view Spray Trigger Upper Handle Retractable handle lock Power Cord Solution Tank Upper Body Collection Tank Latch Vent Cover ( Foam Filter) Removable Nozzle Collection Tank Latch WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Cleaning fluid Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule.
Assembly Your deep cleaner assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver. 1. Locate the screw pack, which is taped to the upper handle. 2. Slide the upper body onto the lower body, taking care not to leave a gap between the upper and lower body. 3. Firmly holding the upper body, screw the 2 screws into the holes marked with arrows. Tip: If you are having difficulty tightening the screws, remove, re-insert, and tighten again. 4.
Operations Fill the tank continued 3. Fill with hot (not boiling) tap water to the 3. WATER line. Fill the rest of the tank with BISSELL 2X Formula to the FORMULA line. Replace and tighten the black cap. 4. Caution: Do not microwave or boil water before filling. 4. Place solution tank on lower body. Tip: To ensure proper function, make sure the tank is completely seated. Failure to do so can result in reduced or no spray. Carpet cleaning 3. 2. 1. Plug into proper outlet. 2.
Operations Empty the collection tank continued 4. Rinse collection tank thoroughly and replace on unit. 2. 4. 5. Refill solution tank and continue cleaning. Hard floor cleaning (Select models only) 1. Remove the collection tank (refer to steps 2a and 2b on page 6). WARNING: 2. Attach the hard floor tool by hooking it into the front of the removable nozzle and rotate until it snaps firmly in place.
Maintenance and care Machine storage For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Wrap power cord around Quick Release Cord Wrap™ on side of the machine. 2. Wipe all surfaces with a soft cloth. Store cleaner upright in a protected, dry area. NOTE: You may have cleaning solution remaining in the solution tank. You may store your machine this way for the next cleaning task, but never keep dirty water in the collection tank.
Troubleshooting Reduced Spray OR No Spray Possible causes Remedies 1. Solution tank empty 1. Refill tank with water and formula 2. Lint screen on solution tank cap clogged 2. Soak solution tank cap in warm water and then rinse under running water 3. Spray Nozzle Clogged 3. Clean Spray nozzle by rinsing under water 4. Upper handle is not in the upright and locked position 4. Rotate the retractable handle lock, pull handle up and return the handle lock to the locked position. 5.
Replacement parts - BISSELL ReadyClean Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item 1 2 3 4 5 6 7 *Not all Part No.
Warranty - BISSELL ReadyClean This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, t elephone, or regular mail as described below.
Don't forget to register your product! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
