User Manual

www.BISSELL.ca

To remove the battery

cover, hold the invisible

wall and press firmly

while sliding downward to

remove the battery cover.

Insert batteries with the

+/- terminals facing the

directions indicated and

replace the battery cover.

(AA batteries not included)

To turn on the virtual wall

slide the switch away from

the light towards the (I)

symbol. Wait 10 seconds

between turning it on or off.

Place the invisible wall in

the threshold of a room or

in front of an area of the

room you do not want the

robot to clean.

The Invisible Wall

: Assembly & Use

1 2 3

NOTE: Indicator light

is only ON when

cleaner approaches

sensor path.

*Requires 4AA batteries. Batteries sold separately

IMPORTANT! Thick carpeting, furniture or other obstructions at the top of

stairs may affect the robot’s navigation system. To make sure your robot sees

the stairs place an Invisible Wall 6 inches from the edge of the stairs.