User Manual

www.BISSELL.ca
18
LED Error Code (power LED fl ashes red)
LED Display
Display on screen Possible cause Solution
The wheel is stuck. Remove vacuum from obstacles, and
restart the power switch.
The top cover or dust
bin is not installed
properly.
Install the top cover and dust bin properly.
The unit will detect the error and fix
automatically. If the unit does not fix
automatically, turn the unit off and back on.
The bumper is stuck. Remove vacuum from obstacles. The unit
will detect the error and fix automatically.
The unit was lifted up
from the floor.
Put vacuum back on the floor.
The color of the floor
is too dark
Remove robot from the flooring. Use virtual
wall to keep the robot off of the flooring.
The battery is not
installed properly.
Charging error.
(Power switch is off)
To install the battery properly, please
refer to page 5 for battery installation,
and turn on the power switch after
installation is complete
Display on screen Indication
Charging mode: Battery is fully charged.
(Power LED Green On)
Battery Low: Battery needs to be charged.
(Power LED Red On)