User`s guide

15 SelectSmartCleanTMsetting
• WATERONLY Useforgentle cleaning ofdelicate
fabrics,or for (optional) rinsing followingcleaning
• NORMALWaterand FiberCleansingFormula are
mixed to optimize normal cleaning Useforeveryday
dirt and soil conditions
• HIGHTRAFFIC Water and Fiber CleansingFormula are
mixed to optimize heavycleaning Usefor ent_vays,
hallways,heavysoiland stains
Thissetting may require more frequent refilling on the
SmartMix_Mbottle.
16. UnwrapPowerCordfrom CordHolderand plug into
120Volt,60 Hzgrounded outlet as describedin Important
SaMy Instructions, page 2.
If cleaner starts when first
plugged in, switch off'until
ready foruse.
Z!kWARNING:Do
not lay unit on its
back with glean
Water Tank Assembly
in place, Do not tip
_afOOt with Dirty
ter Tank Assembly
in place,
WARNING: L,se
only BISSELL Fiber
Cleansing Formula '_' in
ypur POWERSTEAMER?'
Use of cleaning _brmulas
which contain lemon
or pine oil may damage
this appliance and void
warranty Chemical spot
cleaners or solvent
based soil removers
should not be used.
These products may
react with the plastic
materials used in your
POWERSTEAMER'/' causing
cracking or pitting.
1 Slowlymove Upholstery/CarpetToolback and
forth oversoiledsurface, first using sprayonly,
then sprayand vacuum, finishingwith
vacuum only
NOTE:UsetheSprayingCiwiceTool[optional
on somemodels]to spraycleaning solutionand
removesoilfrom areas toosmall tobe reached
with the Upholstery/CarpetTool.
2. Continueto clean soiledarea, working in
small sections,until no more dirt can be
removed.Donot overwet.
3. Ifthe machine loses suction and/or motor
noise risesin pitch, turn PowerSwitchto OFE
Checkthe DirtyWaterTankAssemblyand
emptythe tank if it is full [seeWHENYOU'RE
DONE,page 7].
4. Ifspraytip stopsspraying,turn PowerSwitch
to OFFand checkwater and cleaning solution
levels.Refillif needed.
Neverrun POWERSTEAMERTMdry.