User's Manual

3.2.7 Date/Time
Table 3-6 Date/Time
ICON ITEM & FUNCTION
 “Date/Time” Tab :( Figure 3-6)
Date/Time
 Please see the detail information of 2.5.1 Setting Time and
Date on P2-22
3.2.8 Dialing Properties
Table 3-7 Dialing properties(A)
ICON ITEM & FUNCTION
 “Dialing Properties” Tab :( Figure 3-7-1)
 In the When dialing from list, select the “Location” where you
want to change settings.(Figure 3-7-2)

To create a new location, select “New”. Enter the name of the
location, and then select “OK”.(Figure 3-7-3)

Enter or edit the area code and local country code as needed.

In Dial using, select “Tone dialing” or “Pulse dialing”. Most
phone lines are tone.

To automatically disable call waiting, select “□ Disable call
waiting by dialing＂, select the appropriate number sequence in the
list, or enter a new sequence.
Dialing
Properties
 Editing dialing patterns (Figure 3-7-4)

Using the codes listed in the topic, revise the dialing patterns as
needed.
Notes:
 If you need to use character other than the ones listed here,
use manual dialing.

Hyphens and spaces in dialing strings are ignored.

Some modems may not respond to the following characters,
even though your device lets you add them to the dial
string.
P3-33