User's Manual

3.2.16 Network and Dial-up Connections
Table 3-15(A) Network and Dial-up Connections
ICON ITEM & FUNCTION
Network
and Dial-up
Connections
 “Connection” Tab :
 To create a “Dial-up Connection”:

Double-tap the “Make New connection”.

In the “Make New Connection” dialog box, enter a name for
the connection.

Select “Dial-Up Connection”.

Select the “Next” button.

Select the modem you want use.

Select “Configure”

Under “Connection Reference”, use the default settings
provided. If you can’t connect using these settings, see your
ISP or network administrator for specific information. If you
want to always enter a phone number before connecting,
Select “Manual Dial”. Select “OK”.

Select “TCP/IP Settings”. In the “General” tab, ensure “Use
Server-assigned IP address” is selected. In the “Name
Servers” tab, ensure “Use Server-assigned addresses” is
selected, and select “OK”. If you are unable to connect with
these default settings, see your ISP or network administrator
for specific TCP/IP information.

Select the “Next” button and type the telephone number.

Select the “Finish” button.
The connection you just created appears as an icon in the “Network
and Dial-up Connections” folder.

Set up a point-to-Point Protocol(PPP) account with an ISP and
obtain the following information:

Access telephone number

User name

Password
P3-45