manual

Recipients
Provide the e-mail address in the
corresponding field and click Add to add the
recipient to the list.
To import e-mail addresses from a txt file,
click Import, select the file and then click
Open.
If you want to export the list to a txt file,
click Export and save the file to the desired
location.
To remove one or several selected
recipients click Remove.
Click Apply to save the changes and OK to
close the window.
Net Send Alerts
BitDefender can notify the network administrator by sending configurable alerts through
the net send command upon the occurrence of an event for which they have been
set.
Note
This module integrates with the Net Send command of the Windows Operating System
on which the product is installed and it provides alerts regarding the product activity. In
order to receive such alerts, the Messenger and Alert services must be enabled by the
administrator on the server and on the client workstations.
In order to use the net send notification service, follow these steps:
1. Select Enable Net Send Alerts to activate the net send notification service and
then click Apply to save the changes.
2. Configure the recipients of the net send alerts, as described in the “Configuring Net
Send Alert Recipients” (p. 65) section.
3. Go to the Events tab and configure the events for which net send alerts should be
sent, as described in the “Configuring Events” (p. 70) section.
Monitoring
64
BitDefender Security for Exchange