User's Manual

BUTTONS
1. VIBRATION ON BUTTON
• Powers on Dual Vibration controller motors to simulate game play response.
Wireless Port vibration function default is: Off.
2. POWER ON BUTTON with LED INDICATOR
• Power On button activates Wireless Port for game play. Wireless Port will go into
Sleep Mode after 5 minutes of non-use to conserve battery life, the Power On LED
will go out. Press the Power On button to re-activate the Wireless Port.
IMPORTANT: The Wireless Port is designed for Sony PlayStation controllers
and third party controllers that meet the specifications of the original Sony
controller. Some third party controllers may not be compatible with the
Wireless Port if they do not meet the original Sony controller specifications. It is
always best to use original Sony controllers in the Wireless Port.
OPERATING INSTRUCTIONS
• Connecting the Receiver: The Wireless Port includes a Receiver device that must
connect to both 1 and 2 player controller ports on the PlayStation for the Wireless Port
to function. Wireless Port has two cables with player 1 and 2 markings.
• Connecting the controller to Wireless Port:
1. Remove the battery cover on the bottom of the Wireless Port and insert Four AA
batteries as shown (Illustration 1). Be sure to insert the negative (-) ends first. Replace
the battery cover.
2. Connecting one or two wired controllers to the Wireless Port’s controller slot
3. Turn ON the PlayStation console. Press the Power On button located on the top of
the Wireless Port. The Wireless Port will automatically search for the optimum
frequency to communicate to the Receiver.