User's Manual

LEAR

To use the helmet communicator with your music dongle

you must connect them first wirelessly first by pairing.

This step is only required for music streaming dongles.

Pairing

• To connect the helmet communicator to a music dongle, hold

the Up and Down buttons for 2 seconds. This puts the helmet

communicator into paring mode. The status indicator would

blink blue and red alternately.

• Next, put the music dongle to pairing mode. Both the helmet

communicator should automatically bind to each other.

After pairing the helmet communicator to a music dongle,

you may use the helmet communicator to listen to the

music stored in the music player connected to the dongle.

In order to use the helmet communicator to remotely

control the music streaming device, the music dongle

/music streaming device needs to have Bluetooth

Audio/Video Remote Control capability, AVRCP profile.

Play & Stop

• The Play and Stop command is a toggle function. To play

music press the Answer button 2 times. Pressing the Answer

button 2 two times whilst music is playing would stop it.

Fast Forward

• To skip to the next track, press the Up button 2 times.

Backtrack

• To skip to previous track, press the Down button 2 times.

Music Streaming Operations