User's Manual

LEAR

To use the intercom profile on the helmet communicator

for the first time, you would need to first connect the two

LEAR

helmet communicators wirelessly by pairing.

Pairing

• Pairing readies one UC

LEAR

helmet communicator to search

for the other UC

LEAR

helmet communicator. This pairing

process needs to be carried out only once.

• With both helmet UC

LEAR

communicators powered off, hold

Answer and Down button for 5 seconds for one helmet and

hold Answer and Up buttons for 5 seconds for the other

helmet. The status indicator for both helmets would blink blue

and red alternately while trying to connect to each other.

• During the pairing process, please ensure that there are no

other intercom units in close proximity.

• It is recommended that after the pairing process is successful.

Restart both UC

LEAR

helmet communicators.

After pairing the two UC

LEAR

helmet communicators,

you may now use the intercom profile.

Initiate Intercom (Toggle function)

• To start conversation, hold the Up button for 2 seconds.

• In the event where the link breaks during the conversation,

you will need to re-initiate it when the helmets come back

into Bluetooth range.

Terminate Intercom (Toggle function)

• To end the conversation, hold the Up button for 2 seconds.

Intercom Operations