User's Manual

14
General Operations
Your HBC200 helmet communicator is now all set and ready to go!
The operations described here
are applicable to all modes
of operations.
Power On
• Hold the Answer button for 2 seconds to power on the
helmet communicator. The status indicator will blink blue
and a power up tone can be heard.
Power Off
• To switch off the helmet communicator, press and hold the Answer button for 5 seconds.
The status indicator will blink red 5 times followed by a long beep before fully shutting
down.
Power Save Mode (Auto Power Off)
• If the intercom feature has been in use, and all other Bluetooth devices have been
disconnected, the system will auto shutdown in 1 hour. If the intercom feature has not
been in use and the HBC200 has not connected to any other device, the system will auto
shutdown in 10 minutes.
Low battery
• When the battery level is low, the status indicator light will flash red twice every 2 seconds
while emitting a warning beep every minute.
Status Indicator
Answer Button Up Button
Speaker/
Charging socket
Down Button