User's Manual

Mobile Phone Operations

To use the helmet communicator with your mobile phone for the first time, you must

first connect them wirelessly by pairing.

Pairing

•To connect the helmet communicator to a mobile phone, hold the Up and Down buttons for

2 seconds. This puts the helmet communicator into paring mode. The status indicator

would blink blue and red alternately.

•Next, turn on the mobile phone Bluetooth functions and search for Bluetooth devices.

Select ‘UCLEAR HBC200’ to pair with the desired device.

•When prompted to enter a passcode, enter ‘0000’.

*Most mobile phones when paired would be automatically connected with both phone

and music Bluetooth capabilities.

After pairing the helmet communicator to your mobile phone, you may now use the

helmet communicator to answer your calls or make outgoing calls or listen to music.

Voice Activated Pick Up Calls

•When a call comes to the mobile phone, say ‘hello’ or ‘pick-up’ to answer the call OR

press the Answer button once.

Reject Calls

•To reject an incoming call or an incorrectly placed outgoing call, hold the Answer button for

2 seconds.

Voice Call

•To activate voice call, hold the Down and Answer buttons for 2 seconds. The accuracy of

this function is dependent on the mobile phone.