User's Manual

20
Intercom Operations
Two-Party Intercom
To use the intercom for the first time, you must let the communicators recognize
each other through pairing.
Pairing process needs to be carried out only once.
Pairing
•With both helmet communicators powered off, hold for 5 seconds Answer and Down
buttons on one helmet and Answer and Up buttons on the other. The indicators of both
helmets would blink purple.
•When one of the communicator’s status indicator turns blue, the pairing process is
completed. (even though the other communicator will still blinks purple.)
It is recommended to restart the devices after the pairing process.
Start Intercom
To enable the intercom, hold the Up button for 2 seconds.
Stop Intercom
To disable the intercom, hold the Down button for 2 seconds.