User's Manual

GPS Device

To use a GPS device with the UClear HBC200, the two must first be paired.

Pairing the HBC200 to a GPS Device

•Turn on the HBC200 helment communicator and GPS device

•To connect the helmet communicator to a GPS device, hold the Up and Down buttons

for 2 seconds. This puts the helmet communicator into paring mode. The status indicator

would blink blue and red alternately.

•Next, turn on the GPS device Bluetooth functions and search for Bluetooth audio devices.

Select ‘UCLEAR HBC200’ to pair with the desired device.

•If your GPS device prompts for a passcode, enter ‘0000’.

•Your GPS device will confirm that pairing has succeeded.

*Note: To make calls through the HBC200, you may need to pair your mobile phone to

the GPS device by following the instructions of the GPS device.