User's Manual

Rev. 1.00

- 23 -

SLP-TX220B/TX223B

5-2 Stand-alone Configuration Mode

Various modes can be executed using buttons and LED only.

5-2-1 How to start stand-alone configuration mode

• The printer mode is set to Printer Setting Mode when the Pause button is pressed

for two seconds while in Print Standby Mode.

• Both LEDs will change to orange color and the printer will be set to Stand-alone

Configuration Mode.

• When the printer enters into this mode, the status of LED 1 and LED 2 are changed

sequentially.

• When the Feed button is pressed at specific LED color combination,

the corresponding printer operation will be selected.

5-2-2 List of supported functions

Sequence

number

LED 1 LED 2

Printer operation

Color Status Color Status

Green On

Green Blink four times Print Configuration Info.

2 Orange Blink four times Print File List

3 Red Blink four times Factory Reset

Orange On

Green Blink four times Gap Sensor Auto Calibration

5 Orange Blink four times B/M Sensor Auto Calibration

6 Red Blink four times Data Dump Mode

Red On

Green Blink four times Demo Mode

8 Orange Blink four times Line Mode

9 Red Blink four times Download Items Delete