User's Manual
Table Of Contents
- ※ Manual Information & Usage Precautions
- 1. Content Confirmation
- 2. Product Part Names
- 3. Installation & Usage
- 4. Self-Test
- 5. Detailed features
- 5-1 Printer setting using utility program
- 5-2 Stand-alone Configuration Mode
- 5-3 Pause/Cancel
- 5-4 Media Calibration
- 5-5 Smart Media Detection
- 5-6 Gap Sensor Auto Calibration Mode
- 5-7 Black Mark Sensor Auto Calibration Mode
- 5-8 Manual Calibration Mode
- 5-9 Cover Closing Mode
- 5-10 Data Dump Mode
- 5-11 Factory Reset
- 5-12 The Peel-Off (Option)
- 5-13 Using Fan-Fold Paper
- 5-14 Auto Cutter (Option)
- 5-15 Real-Time Clock (Option)
- 6. Bluetooth Connection (iOS,Android)
- 7. Cleaning Head
- 8. Appendix
Rev. 1.00
- 19 -
SLP-TX420B/TX423B
3-5-2 LED indicator for various printer statuses
LED 1 LED 2
Printer Status
Color Status Color Status
Green On Green On
Print standby
mode
Print standby mode
Red On Red On Error mode Ribbon is not detected
Red On Orange On Error mode
Paper jam (gap/black mark is
not recognized)
Red On Green Blink Error mode Printer head overheating
Red On Red Blink Error mode Paper Cover open
Red On Orange Blink Error mode No paper
Red On - Off Error mode Media calibration failure
Red Blink Red Blink Error mode Auto-Cutter error
Orange On Orange On
Mode switching
notification
Mode switching notification
Green Blink Red On Wait for input
Print is paused temporarily.
Wait for button input
Green Blink Green Blink Wait for input
Cover Close Mode.
Wait for button input
Green On Red Blink Wait for input
Print Cancel Mode.
Wait for button input