User's Manual
Table Of Contents
- ※ Manual Information & Usage Precautions
- 1. Content Confirmation
- 2. Product Part Names
- 3. Installation & Usage
- 4. Self-Test
- 5. Detailed features
- 5-1 Printer setting using utility program
- 5-2 Stand-alone Configuration Mode
- 5-3 Pause/Cancel
- 5-4 Media Calibration
- 5-5 Smart Media Detection
- 5-6 Gap Sensor Auto Calibration Mode
- 5-7 Black Mark Sensor Auto Calibration Mode
- 5-8 Manual Calibration Mode
- 5-9 Cover Closing Mode
- 5-10 Data Dump Mode
- 5-11 Factory Reset
- 5-12 The Peel-Off (Option)
- 5-13 Using Fan-Fold Paper
- 5-14 Auto Cutter (Option)
- 5-15 Real-Time Clock (Option)
- 6. Bluetooth Connection (iOS,Android)
- 7. Cleaning Head
- 8. Appendix
Rev. 1.00
- 35 -
SLP-TX420B/TX423B
6. Bluetooth Connection (iOS,Android)
This Bluetooth connection contents provide information on the connection of Bluetooth-
enabled devices with the printer.
6-1. Precautions
- To connect the printer with another device via Bluetooth, the devices must be
within 100m of one another. The connection is broken if the distance between
devices exceeds 100m.
- The maximum separating distance may be shortened if transmission obstacles,
such as cement walls, are present.
- If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least
5m.
6-2. Bluetooth Connection Instructions
This section focuses on the use of the following devices.
Please use this manual as a guide when using devices other than those listed here.
1) Select the icon. 2) Select “Bluetooth”.