User's Manual
Table Of Contents
- ※ Manual Information & Usage Precautions
- 1. Content Confirmation
- 2. Product Part Names
- 3. Installation & Usage
- 4. Self-Test
- 5. Detailed features
- 5-1 Printer setting using utility program
- 5-2 Stand-alone Configuration Mode
- 5-3 Pause/Cancel
- 5-4 Media Calibration
- 5-5 Smart Media Detection
- 5-6 Gap Sensor Auto Calibration Mode
- 5-7 Black Mark Sensor Auto Calibration Mode
- 5-8 Manual Calibration Mode
- 5-9 Cover Closing Mode
- 5-10 Data Dump Mode
- 5-11 Factory Reset
- 5-12 The Peel-Off (Option)
- 5-13 Using Fan-Fold Paper
- 5-14 Auto Cutter (Option)
- 5-15 Real-Time Clock (Option)
- 6. Cleaning Head
- 7. Appendix
SLP-DX220B/DX223B
7. Appendix
7-1 Specifications
Item
Description
Printer
Printing Method
Direct Thermal Printing
Dot Density
SLP-DX220B : 203 dpi (8 dot/mm)
SLP-DX223B : 300 dpi (11.8 dot/mm)
Printing Width
SLP-DX220B : Max. 54 mm (Max. 2.13”)
SLP-DX223B : Max. 56.9 mm (Max. 2.24”)
Printing Speed
SLP-DX220B : Max. 152.4 mm/sec (Max. 6ips)
SLP-DX223B : Max. 101.6 mm/sec (Max. 4ips)
Paper
Width
15 ~ 60 mm (0.59 ~ 2.36”)
Roll
Max 130mm (Max. 5.12”)
Core
12.5 ~ 38.1mm (0.5 ~ 1.5”)
AC
Adapter
Input Voltage
AC 100 ~ 240V
Frequency
50/60 Hz
Output Voltage
DC 24V ± 5%
Output Current
2.5A
Usage
Conditions
Temperature
0 ~ 40
℃
(Operating)
-20 ~ 60
℃
(Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※
Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is for indoor use and all the communication wirings are limited to inside
of the building.
- The switch is the disconnecting device. Turn off switch from any hazard.
7-2 Label Types
The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET
Rev. 0.01
- 32 -