User's Manual
Table Of Contents
- ※ Manual Information & Usage Precautions
- 1. Content Confirmation
- 2. Product Part Names
- 3. Installation & Usage
- 4. Self-Test
- 5. Label Printing Function
- 6. Peripherals Connection
- 7. Printer Cleaning
- 8. Appendix
Rev. 1.01
- 19 -
SPP-R200
3-5 Leather Case (Optional) Usage
1) Undo the Velcro.
2) Place the printer into the leather case
following the direction shown in the
image.
3) Close the Velcro.
4) Affix to a belt using the clip at the rear of
the case.
NOTE
The clip on the leather case can be rotated
two stages by 30° per stage (maximum 60°)
Belt