Bluetooth Connection Manual SPP-R200 Mobile Printer Rev. 1.07 http://www.bixolon.
SPP-R200 ■ Table of Contents 1. Manual Information......................................................................................................... 3 2. Precautions ..................................................................................................................... 3 3. General Sequence for Bluetooth Connections ............................................................ 3 4. Bluetooth Connection Instructions ......................................................................
SPP-R200 1. Manual Information This Bluetooth Connection Manual provides information on the connection of Bluetoothenabled devices (PDAs, PCs, etc.) with the printer (SPP-R200). We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice. 2. Precautions 2-1 To connect the printer with another device via Bluetooth, the devices must be within 10m of one another.
SPP-R200 4. Bluetooth Connection Instructions This manual focuses on the use of the following devices. Please use this manual as a guide when using devices other than those listed here. - Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0) - SYMBOL PDA (Device: SYMBOL MC70, OS: Windows Mobile 5.0) - HP PDA (Device: iPAQ hx2700, OS: Windows Mobile 5.1.1702) - Mobile Compia PDA (Device: M3, OS: WinCE 5.0) - InnoTeletek PDA (Device: MC3000, OS: WinCE 4.2) - Widefly PDA (Device: WF35, OS: WinCE 5.
SPP-R200 4-1 Connecting with an Intermec PDA (Device: CN2B, OS: Pocket PC 4.20.0) 1) Click the icon. 2) Click “Settings”. 3) Click “Connections”. Rev. 1.07 4) Click the “Bluetooth” icon.
SPP-R200 5) Click to check the “On” option. 6) Click the “Wireless Printing” menu bar 7) Click the ”Device Discovery” button. 8) Select Devices of the SPP-R200, and click the “Connect” button. Rev. 1.
SPP-R200 9) Select the COM port to be used. 10) Check the “Enable Wireless Printing” and ”Default” checkboxes, and click the “Printer Test Page” button. 11) Click the “OK” button. 12) The PIN Code(Device PIN) window appears (if the SPP-R200 security function is enabled). Rev. 1.
SPP-R200 13) Input the PIN Code(Device PIN) 14) If after pressing the “Print Test Page” button, and click “Next”. (Default code: 0000) the BT LED of the SPP-R200 turns on and test printing is performed, the connection is complete. Rev. 1.
SPP-R200 4-2 Connecting with a SYMBOL PDA (Device: SYMBOL MC70, OS: Windows Mobile 5.0) 1) Click the 3) Click the Rev. 1.07 icon. 2) Click ”Enable Bluetooth”. icon. 4) Click “Show BTExplorer”’.
SPP-R200 5) Click ”File”. 6) Click “New Connection”. 7) Click ”Associate Serial Port”. Rev. 1.07 8) Click the “Next” button.
SPP-R200 9) Click the List window for 2 seconds and 10) Click “Refresh”. the function folder appears. Click for 2 seconds. 11) Bluetooth devices in the proximity are 12) Select the Device Address of the discovered. Rev. 1.07 SPP-R200, and click the “Next” button.
SPP-R200 13) The Serial port is registered as COM9. 15) Click ”Connect”. 14) Click the SPP-R200 name for 2 seconds. 16) The PIN Code window appears (if the SPP-R200 security function is enabled). Rev. 1.
SPP-R200 17) Input the PIN Code and click “Enter”. 18) The “Connection Successful” message (Default PIN Code: 0000) appears, and the connection is complete when the BT LED of the SPP-R200 turns on. Rev. 1.
SPP-R200 4-3 Connecting with an HP PDA (Device: iPAQ hx2700, OS: Windows Mobile 5.1.1702) 1) To run Bluetooth, first click the 2) Click the Bluetooth logo button icon at the lower right of the screen. to activate the Bluetooth function. Not active 3) When activated, the Bluetooth button turns 4) Click ”New“. green. Click the “Manager” button to connect to the SPP-R200. Rev. 1.
SPP-R200 5) Click ”Explore a Bluetooth device”. 6) Click the SPP-R200 icon from the Bluetooth devices displayed in the search results. 7) Select BIXOLON-SPP and click “Next”. Rev. 1.07 8) Click “Done”.
SPP-R200 9) The SPP-R200 shortcut is produced. 10) Clicking the shortcut for 2 seconds brings up the function folder. Click “Connect”. 11) The Pass Key window appears (if the 12) Input the Pass Key and click “Enter” SPP-R200 security function is enabled). Rev. 1.
SPP-R200 13) The shortcut changes to show a green indicator as Shown below. The connection is complete when the BT LED of the SPP-R200 turns on. Rev. 1.
SPP-R200 4-4 Connecting with a Mobile Compia PDA (Device: M3, OS: WinCE 5.0) 1) Click the icon. 3) Click the icon. Rev. 1.07 2) Click ”BT On”. 4) Click ”BT Manager”.
SPP-R200 5) Click ”Find All Devices”. 6) Click the ”Next” button. 7) Click “Refresh”. 8) Click the SPP-R200 from the Bluetooth devices in the search list, and click “Next”. Rev. 1.
SPP-R200 9) Select BIXOLON-SPP and click “Next”. 10) Click “Connect” 11) Click ”My favorite device”. 12) Clicking the shortcut for 2 seconds brings up the function folder. Click “Connect”. Rev. 1.
SPP-R200 13) Click “Connect” 14) The Pass Key window appears (if the. SPP-R200 security function is enabled). 15) Input the Pass Key and click “Enter” 16) The “Connection Established” message (Default Pass Key: 0000) appears, and the connection is complete when the BT LED of the SPP-R200 turns on. Rev. 1.
SPP-R200 17) The connection is complete when the shortcut changes to show a green indicator as shown below Rev. 1.
SPP-R200 4-5 Connecting with an InnoTeletek PDA (Device: MC3000, OS: WinCE 4.2) 1) Click the ”sppui” icon. 3) Click the “Inquiry” button. Rev. 1.07 2) Click the icon. 4) Select SPP-R200 and click “OK” button.
SPP-R200 5) The PIN Code window(Select channel) 6) Input the PIN Code and click “Enter”. appears (if the SPP-R200 security function (Default: 0000) is enabled). 7) The Serial port is registered as COM7. Rev. 1.07 8) Click the ”My Computer” icon.
SPP-R200 9) Click “Storage”. 10) Click ”BTPrinter”. 11) Click “InnoPrinter”. 12) The “Port Opened” Status message appears, and the connection is complete when the BT LED of the SPP-R200 turns on. the “TEXT” button. Rev. 1.
SPP-R200 13) Enter text to be printed in the Text window and click the “Print” button. The text is printed by the Printer(SPP-R200). Rev. 1.
SPP-R200 4-6 Connecting with a Widefly PDA (Device: WF35, OS: WinCE 5.0) 1) Click the icon then “Settings”. 2) Click “Control Panel”. 3) Click “Bluetooth Device Properties”. 4) Click Bluetooth button. (select ON if Bluetooth is turned on automatically for every boot up of PDA.) Rev. 1.
SPP-R200 5) Click “Search” page then “Search” button. 6) Enter PIN code (default “0000”) and Click “OK”. 7) SPP-R200 is searched with “Serial Port”. 8) Enter PIN code (default “0000”) and Click “OK”. service listed. Click “Add service”. Rev. 1.
SPP-R200 9) Press “OK” to activate “Serial Port” service. 10) Select virtual local COM port for applications and click “OK”. (e.g. COM port 6). 11) SPP-R200 is paired with WF35 and virtual local COM port is activated. Rev. 1.
SPP-R200 4-7 Connecting with Bluetooth Dongle (BlueSoleil IVT Stack) 1) After purchasing Bluetooth Dongle, insert the CD in the PC and install Bluesoleil. 2) Connect Bluetooth Dongle to the USB port of the PC. 3) Click the Bluesoleil icon on the PC screen top. 4) Click the red sphere at the center of the Bluesoleil main screen. 5) The program initiates a search for Bluetooth devices in the proximity. Rev. 1.
SPP-R200 6) Click right button of the mouse above the "IFX-BT Icon" and select the “Pair Device”. 7) Enter the PIN Code in the Bluetooth Passkey window. (Default Passkey: 0000) Rev. 1.
SPP-R200 8) If the Passkey(PIN Code) is correct and pairing is completed, a red check symbol appears next to the SPP-R200 icon. 9) Click right button of the mouse above the "SPP-R200 Icon" and select the "Connect > Bluetooth Serial Port Service". Rev. 1.
SPP-R200 10) When the connection is established, the icon turns green, and a green dotted line appears as shown in the image below. 11) The connection is complete when the BT LED of the SPP-R200 turns on. 12) When the connection is complete, the message pictured below appears at the bottom right of the PC screen. The COM port number shown in the message indicates the COM port via which the SPP-R200 and the PC are connected. Rev. 1.
SPP-R200 4-8 Connecting with Bluetooth Dongle (Widcomm Stack) 1) After purchasing Bluetooth Dongle, insert the CD in the PC and install Bluesoleil. 2) Connect Bluetooth Dongle to the USB port of the PC. 3) Click the My Bluetooth Places icon on the PC screen top. 4) Click “Bluetooth Tasks > Add a Bluetooth services” 5) Click ”Next”. Rev. 1.
SPP-R200 6) Select “Show all devices” and Click “Next”. 7) The program initiates a search for Bluetooth devices in the proximity. Rev. 1.
SPP-R200 8) Enter the PIN Code in the Bluetooth Passkey window. (Default Passkey: 0000) 9) If the Passkey(PIN Code) is correct and pairing is completed, a green check symbol appears next to the BIXOLON_SPP icon. Click “Configure” Rev. 1.
SPP-R200 11) Check COM Port 12) Click “Next” Rev. 1.
SPP-R200 13) Click “Finish”. 14) The shortcut changes to show a green indicator asshown below. The connection is complete when the BT LED of the SPP-R200 turns on. Rev. 1.
