User`s manual
Table Of Contents
- 1. Setting Up the Printer
- 1-1 Unpacking
- 1-2 Connecting the Cables
- 1-3 Connecting the Drawer
- 1-4 Setting the Dip Switches
- 1-5 Setting the Memory Switches
- 1-6 Installing or Replacing the Paper Roll
- 1-7 Adjustments and Settings
- 1-8 Using the Printer
- 1-9 Connecting the computer
- 1-10 Connecting the Power Supply
- 2. Self test
- 3. Hexadecimal Dumping
- 4. Specification
- 5. Appendix
Rev. 1.04
- 21 -
SRP-350plusA&C
4. Specification
Item Details
Printing Method Thermal Line Printing
Dot Density
SRP-350plus: 180 X 180 dpi (7dots/mm)
SRP-352plus: 203 X 203 dpi (8dots/mm)
Printing Width 72.192±0.2mm
Characters per line
(Default)
SRP-350plus: 42 (Font A) / 56 (Font B)
SRP-352plus: 48 (Font A) / 64 (Font B)
Printing Speed *1)
47 lines/sec (1/6” Feed)
200 mm/sec
Receive Buffer Size 64K Bytes
SMPS Input Voltage 100/240 VAC
Frequency 50/60 Hz
SMPS Output Voltage +24 VDC
Temperature
0 ~ 40 (Operating)℃
-10 ~ 50 (Storage)℃
Humidity
30 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Auto Cutter 1,800,000 Cuts
Printer
Mechanism MCBF *2) 70,000,000 Lines
Paper Type Paper Roll
Roll Width 79mm~80mm, 82.5mm
Roll Diameter Max 83mm
Paper Thickness 0.07mm
Paper
Paper Tube
Inner: Ø12mm (0.47”)
Outer: Ø18mm (0.71”)
Note※
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature. The values may vary with environment temperature, printing
level, etc.