Product specifications

SLCS Programming Manual
Rev. 1.24
- 38 -
2-2-3 SF (Set Back-Feed Option)
Description
Set back-feed option.
This command decides whether printer does back-feed action before starting printing.
Syntax
SFp1(,p2)
Parameters
p1 : Enable/Disable
- 0 : Disable back-feed option.
- 1 : Enable back-feed option(Default)
p2 : Back feeding step quantity.
- This parameter is valid when p1 is 1.
- The step quantity defined by user can’t exceed printer’s default feeding quantity.
- 0 means printer’s default feeding quantity.
♣ This option is useful for the continuous paper or black mark media with perforation line
away from black mark.
♣ The printer’s default back feeding step quantity depends on the printer models and
printer modes such as normal, peeler or cutter.
Examples)
SF0 → Disable Printer’s back-feeding option.
SF1 → Default quantity of Back feed is executed before printing.
SL1,0 → Default quantity of Back feed is executed before printing.
SL1,100 → 100 step’s Back feed is executed before printing.
SL0,100 → Back feed is disabled and p2(100) is ignored.