Product specifications

SLCS Programming Manual
Rev. 1.24
- 48 -
2-3-5 SA (Set Offset)
Description
Save (set) offset length between black marks (or gap) and dotted lines [dots]
Syntax
SAp1
Parameters
p1 : -100~100
♣ Offset values saved via the use of SA commands are stored permanently on the printer.
(Offset values saved via the cf. SL command are reset after the power is turned off.)
2-3-6 TA (Tear-off/Cutter Position Setting)
Description
This function regulates the label cutting location After printing.
Tear-off position or Cut position can adjust.
Syntax
TAp1
Parameters
p1 : -100~100
♣ Tear-off/Cutter Position values saved via the use of TA commands are stored permanently
on the printer.