Product specifications

SLCS Programming Manual
Rev. 1.24
- 8 -
1-3 Command List
Command Description Remarks Page
1. Commands for Designing Label
T
Text Draw text string on the image buffer
V
Text (Vector Font) Draw text string on the image buffer
B1
1d barcode Draw 1D Barcode on the image buffer
B2
2d barcode Draw 2D Barcode on the image buffer
B3
Special barcode Draw special barcode on the image buffer
BD
Block Draw Draw line or box on the image buffer
CD
Circle Draw Draw circle on the image buffer
CS
Character Set selection Select international code table
P
Print Start printing the content of image buffer
2. Media & Buffer related Commands
ST
Set Print Type Select Thermal Direct / Transfer printing
SM
Set Margin Set the marginal value of the image buffer
SF
Set Back-feed Option Set back-feeding option
SL
Set Label Length Set length of label
SW
Set Label Width Set length of label
SB
Set Buffer mode
Enable or Disable double buffering
function
CB
Clear Buffer Clear image buffer
3. Printer Setting Commands
SS
Set Speed Set printing speed
SD
Set Density Set printing density from level 0 to 20
SO
Set Orientation Set printing direction
SP
Set serial Port Set serial port configurations
SA
Set Offset Set offset value
TA
Set Tear-off/Cut Set Tear-off/Cut value
4. Variable related Commands
SC
Set Counter Used in Template sequence
AC
Set Counter Used in normal mode
SV
Set Variable Used in Template sequence
?
Get variables Get content of variables and counters
PV
Print with Variable Use this command in Template