Specifications

SRP-F310/312
Rev. 1.00 BIXOLON
- 143 -
BS ^ T
Function : Set Last Status Back(LSB) time
Code :
ASCII
BS ^ T n
Hex
08 5E 54 n
Decimal
08 94 84 n
Range:
0 < n < 30
Default:
n = 5
Description :
■ Set the check time interval to change the status of printer.
■ If there is any change comparing new status value to old status value,new status value will be stored in LSB buffer.
■ When the printer status changes, new status value will not be sent to host but be stored in LSB buffer.
■ The printer processor checks buffer periodically. If there is any change on status value, latest status value will be sent
to the host.
Remarks :
■ The LSB(Last Status Back) set time is [n x 100ms] and the default time is 500 ms.
• If n is smaller than 1 or greater than 29, the LSB(Last Status Back) time is set to defaut[5 x 100ms].
Differences:
None