User's Manual

19
www.cmaxwireless.co.kr
[Figure 3.1.6.1] BSS Setting
l Reset : Delete current information of BSSID
l Get BSS Information : Scanning information of BSSID. If the problem of network occurs,
the printers will not scan. Then, you press the [Get BSS Information] button again.
l Select : Select BSS that searched.
l Next : Move to the configuration page of Network
l Back : Move to the configuration page of Protocol
3.1.7 Network
: Set the network parameter of CMAX Module
[Figure 3.1.7.1] Network Setting
l Network Mode : Select the Infra Network or Adhoc mode.
Note : If adhoc mode user selects to connect a adhoc-channel (1~14).
l SSID : Set the SSID that user is going to connect. SSID Can set up maximum of 32 bytes.
l Inactivity Time : After connecting to the server of printer, It is time to maintain a
connection with the server. Default setting : Disable, Maximum time : 32767(sec)
l IP Assignment Method : Supported Automatic Allocation(DHCP Client) or Manual
Allocation. Default setting : Manual Allocation
- Automatic Allocation(DHCP Client) : Assigns the IP Address that is assigned in the
DHCP server automatically
- Manual Allocation : Does not assign the IP address in the AP(Access Point)’s DHCP
server. User should insert the IP Address that is such as IP Address of AP.