User's Manual

27
www.cmaxwireless.co.kr
: After inserting the network configuration, user should press the “SUBMIT” button to set.
[Figure 3.2.5.1] Network Setting
l Network Mode : Select the Infra Network or Adhoc mode.
l Note : If adhoc mode user selects to connect a adhoc-channel (1~14).
l SSID : Set the SSID that user is going to connect. SSID Can set up maximum of 32
bytes.
l Inactivity Time : After connecting to the server of printer, It is time to maintain a
connection with the server. Default setting : Disable, Maximum time : 3600(sec)
l IP Assignment Method : Supported Automatic Allocation(DHCP Client) or Manual
Allocation. Default setting : Manual Allocation
l Automatic Allocation(DHCP Client) : Assigns the IP Address that is assigned in the DHCP
server automatically
l Manual Allocation : Does not assign the IP address in the AP(Access Point)’s DHCP server.
User should insert the IP Address that is such as IP Address of AP.
l IP Address : Insert the [IP Address] of AP : Default IP Address : 192.168.1.1
l Subnet Mask : Insert the [Subnet Mask] of AP : Default subnet Mask : 255.255.255.0
l Gateway : Insert the [Gateway] of AP : Default Gateway : 192.168.1.2
3.2.6 Authentication
: After inserting the security features, user should press the “SUBMIT” button
to apply on the system.