User's Manual

41
www.cmaxwireless.co.kr
6. Authentication ID: It should be configure the Authentication ID same as AP’s
Authentication ID.
7. Authentication Password: It should be configured the Authentication password same as
AP's Authentication password to be access.
3.5 SNMP
It is managed a network information through SNMP (supported SNMPv1).
Note :
SNMP stands for 'Simple Network Management Protocol' and it is used for network
management.
SNMP is only a protocol to transfer messages so it need the Application program to get Network
management information using SNMP. SNMP has SNMP manager and agent, as in common network
application is composed server and client model. SNMP agent is a part of SNMP module and it is
installed in managed system to collect the network or system information. SNMP manager is also part
of the SNMP module and it request the network information to SNMP agent.
3.5.1 SNMP Connection
: It should be connect a SNMP Agent through SNMP Manager. It is introduced a SNMP
operation at this manual as used SNMP-JManger-v1.0.
l SNMP-JManager-v1.0 running
- Input the address(192.168.1.1 , CMAX module’s IP Address) to ‘Agent IP Address’.
n Default : IP Address : 192.168.1.1
- Input the Read Community, Write Community and then click “Apply Changes” button.
n Default : Read Community : public Write Community : private