User's Manual

56
www.cmaxwireless.co.kr
20Kbyte(WLAN),
15Kbyte(Serial)
Check sum
unsigned char[2]
Message
SUCCESS
(Device→Host)
SUCCESS
CMD("__[I_F]__[IF__SUC]")
unsigned char[18]
Receive Success
response
Check sum
unsigned char[2]
FW END
Message
(Host→Device)
FW END
CMD("__[I_F]__[FW__END]")
unsigned char[18]
End of Firmware
transmit
Check sum
unsigned char[2]
Message
SUCCESS
(Device→Host)
SUCCESS
CMD("__[I_F]__[IF__SUC]")
unsigned char[18]
Success response
Check sum
unsigned char[2]
Message FAIL
(Host↔Device)
FAIL
CMD("__[I_F]__[___FAIL]")
unsigned char[18]
Fail response
Check sum
unsigned char[2]
FW CANCEL
Request
(Host→Device)
FW CRC
ERROR("__[I_F]__[FW_XREQ]"
)
unsigned char[18]
Check sum
unsigned char[2]
FW CANCEL
Response
(Device→Host)
FW CRC
ERROR("__[I_F]__[FW_XRSP]")
unsigned char[18]
Check sum
unsigned char[2]
FW CRC ERR
Message
(Host↔Device)
FW CRC
ERROR("__[I_F]__[CRC_ERR]")
unsigned char[18]
Verify does ‘FW
Data’ after Flash
write one.
Check sum
unsigned char[2]
CERTIFICATE
(CA, CLIENT
KEY, CLIENT
PEM,
FAST PAC)
UPLOAD
SERIAL MODE ONLY
Certificate Data
Message
(Host→Device)
Certificate Data
CMD("__[I_F]__[FW_CERT]")
unsigned char[18]
In serial Mode
‘Certificate Data
Message’ is
performed only by
using the ‘Certificate
Upload’.
(Certificate is
classified by using
the ‘ Serial Start
command)
Max Size : 500byte
Certificate Size
unsigned char[8]
Certificate Data
variable
Check sum
unsigned char[2]
Certificate Data
End Message
(Device→Host)
Certificate Data END
CMD("__[I_F]__[CERTEND]")
unsigned char[18]
Certificate Size
unsigned char[8]
Certificate Data
variable
Max Size : 500byte
Check sum
unsigned char[2]
Message
SUCCESS
unsigned char[18]
Success response